10 inch 6 port switch LAN
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a faceplate and a holder for a 6 port LAN switch
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
I printed it out in PETG. However with the step files, you can order the faceplate out of metal from services like JLCCNC or similar.
For assembly just use heat set inserts (M4 5x6mm) and M4x8 bolts. To attach the sidepieces to the switch, I used M3x8 bolts.
I made it specifically for the model shown in the image, I would imagine though, that this can be used for most if not all the LAN switches that look the same. I haven't tried though.
Here is the link to aliexpress that I bought: https://a.aliexpress.com/_EG0jiHU
The sidepiece needs to be printed twice, one of them mirrored.