Anet E10 On-Frame Enclosure MK1 (2020 Extrusion)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Work in Progress: Anet E10 On-Frame Enclosure
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is very much so a WIP, please keep that in mind!
This is my take on redesigning the electronics enclosure for the Anet E10 3D printer. It features mounts for an SKR V1.3/4 board, Raspberry Pi 3 as well as cable management & an XT60E-M connector for easy PSU connection. More features to come soon, check below. I am currently completely re-building the printer using many designs from Thingiverse which you can see in the photos, links for them are below. Please like this project and leave a comment with any features, ideas, or just feedback on the design and if you'd like to use this yourself! Once the design is more or less complete I'll upload .STEP files for anyone to modify the design to their needs.
Current Features:
- SKR Board Mount
- Raspberry Pi 3 Mount
- Stepper Motor Wire Hold Down
- XT60E-M Connector
- Raspberry Pi to SKR Board USB Cable Zip Tie Mounts
- Heatbed thermistor under board routing (Ref pics)
- BTT Rear Logo
Planned Features:
- Finish enclosure & cover
- Mount for 60mm fan on enclosure cover
- Finish cable management ports
- Mount for BTT Mini UPS 12V (Maybe 24V)
- Mounting bracket for Raspberry Pi that uses M3 bolts instead of M2
- Heat-set inserts for some bolt holes to allow easy mounting
Required Parts:
- 2x M4x10 Bolts for Rear Brace Bottom to mount to T-Slot Bolts
- 4x M4x12 Bolts for Rear Brace mounting to Main Base
- 4x M3x8 Bolts for SKR Mounting holes
- 2x M3x20 Bolts for Stepper Motor Wire Hold Down (Optional)
- 4x M2x6 Bolts for Raspberry Pi Mounting(WIP future M3 bolt Bracket)
- XT60E-M Panel Mount connector for connecting to PSU
- Zip Ties
- 12" Right Angle USB Cable (Optional)
(More bolts will be needed in the future)
Other Anet E10 Upgrades:
- Anet E10 X-Axis Guide Rod System Complete - IGUS Bearing
- E10 PSU Cover for 2040 rails -- S-240-12
- Anet E10 Y-Axis Motor Cover
- Anet E10 E12 Y-belt Tensioner
- Biqu/Bigtreetech TFT24 v1.1 with 2020 mount
- Twist In Cable Clamp (2020 Aluminium Profile)
- Raspberry Pi 3 B+ Model from Grabcad
- Black & Green Expandable Sleeving
Print Settings
Printer:
Prusa Mini
Rafts:
No
Supports:
Yes
Notes:
I'd recommend printing these parts in something relatively strong and heat resistant, though if you install the enclosure fan then even PLA would probably be fine.
Category: 3D Printer Accessories