Liczymy pasujące modele…
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
Custom PCB Klicky Mounts for the ‘The100 v1.1’ printer. The100 v1.1 printer PCB Klicky Probe Mount the100_pcb_klicky_connector_plate.stl Designed to replace stock Connector Plate.stl on the toolhead. Places the PCB klicky probe inline…
The stand provided with the Tuya Zigbee temperature and humidity sensor was wobbly and in an angle. I prefer a more sturdy and vertical stand. I spent some time in Fusion360 and came up with this stand. Posting a make and liking the model…
Since the adhesive version of the back plate of the Tuya temperature / humidity sensor (zigbee model TS0201 / MIR-TE100-TY) did not seem optimal in many places, I designed a compatible spare part for the back plate and based on this a…
The reTerminal E1002 only comes with a landscape / horizontal stand. This is a portrait/vertical stand for it. 2 versions, 10deg and 20deg Needs a short M3 screw
The bulb hanger is backwards and works in the opposite direction than I want/need - so I designed a cap to super glue to the top of it. Because these hangers are one direction, they can only be run from right to left, not left to right.…
A tool holder designed to have all our utilities that are used daily in our 3d printer. It is designed in principle for the Anet E10, since it is long enough to avoid the X-axis tensioner (improvement), but it can be used in any other 3d…
I created this model to hold my Canon LP-E10 batteries in place on the charger because the spring would push the battery up and prevent it from charging. This Model was created in Fusion 360. Enjoy!
So After I bought a tripod with an arcaswiss mount, I was annoyed since my zve10 didn't have an arcaswiss mount allowing to be attached on portrait, so I remixed this thing to be screwed on the cage's sides uses 2 1/4x10 screws
Since I'm currently finishing off the building of my The100 tank 3D printer and using this electronic tray, I've designed this custom-fit cover/lid for it. This design ensures your electronics are protected from dust and debris . The…
Card holder I designed for Phase10 game cards. Will hold 18mm thick deck on each side. Also has insets for magnets and M3 screws to hold the lid on (lightly. I wont support the weight of the deck upside down). You can print multiple…
I had this printed at Detroit 3D Manufacturing via Craftcloud in black PETG at 60% infill (to give it some weight). I have the original E10K (micro-USB), but there is a newer E10K-TypeC (USB-C) which I have not tested, but I believe it is…
I needed to use a right-angle USB cable to keep things clean and not sticking out the sides of the cube, so I made this remix. Print as you did with Side1, and everything should work fine. Made to work with this model: I used this USB cable
I really wanted to have an all-in-one type console that had an NFC card slot to launch games and this ejector mechanism is great. I combined it with the footprint of the DE10 Nano stack - MiSTer project CUBE case. To keep things very…
a simple extension to expand this cube rack from 10 inches to 19 inches
The reTerminal E1002 only comes with a landscape / horizontal stand. This is a portrait/vertical stand for it. 2 versions, 10deg and 20deg Needs a short M3 screw
Easy print E-100 Scale 1/100 (Required some glue and sanding) The Panzerkampfwagen E-100 (Gerät 383) (TG-01) was a German super-heavy tank design developed towards the end of World War II . It was the largest of the Entwicklung series of…
Better than no slot bracket, this one does a reasonable job of filling the empty space, in my old 486 machine.
Have too many batteries but they're always falling over and you don't want to print two separate holders for it? Probably not. Here it is anyway!
All the modifications I made to GutBomb's original models were done in TinkerCAD. Printed on modified original Ender 3 (Direct drive, Sprite Extruder, CR Touch) eSun Bone White PLA+ filament used
Cover for low voltage lamps (E10 bulb) to be used esp. for model purposes, like garden model public or other lighting. We use it on our garden railway, as well as in our garden where we have installed 12 volts electricity supply, in order…
I wanted a small case for my E10 solder tips. I printed it with PETG filament because I have made it with thin walls. I have made a handgrip version for persons that have sweaty hands (like me). You will see various version of cap because…
Nice little box for the Sony ZV-10 camera with the kit lens. The extra space can be used for an additional accessories, such as battery, cables, SD cards, etc. The lid fits loosely on top and is held in place by 8 5x3mm magnets. They…
Since I inherited a large filing cabinet I wanted to store my larger items also (instead of holding them on a desk). Since I already used Gridfinity for my other drawers, it was logical to use it here also. This is solely for the…
Since I inherited a large filing cabinet I wanted to store my larger items also (instead of holding them on a desk). Since I already used Gridfinity for my other drawers, it was logical to use it here also. This is solely for the…
This stand is a super fast, simple stand for Phase10 but it will work with any score board that is less than 5mm thick. If yours is slightly thicker it's a very simple job to scale it in your slicer to suit. Let me know if you would like…
Ein Untertischhalter für die Weller Lötstation. Die Lötstation kann nach der Montage auch noch aus dem Halter herausgehoben werden, ohne die Halter zu entfernen. Die Station hält durch die etwas längeren Gehäusefüsse automatisch.
Prints without supports with almost any filament
Lötzinn Abroller Weller WE1010 für Rollen mit min. 10mm Innendurchmesser Des weiteren wird benötigt: 1x Kugellager 608 Z z.B. https://amzn.eu/d/4DOp6TS 2x M4 Gewinde-Einschmelzhülse (M4x6x6) z.B.: https://amzn.eu/d/bWqURZo 2x M4x10…
A simple mount for a USB extension cable to mount a key chain LED light (or other things) to your printer's frame. I used a T-nut and bolt that came as spare parts with the CR-10 to mount it to the frame. To use it on the other side, just…
This is my Sony ZVE10 Camera Dummy Scan. Have fun and build nice things for your ZVE10.
Originally published here: Samsung Galaxy Note10 n970 case by tato_713 - Thingiverse These cases were designed only for rigid materials, because the wide range curved borders prevent to make a good attach for the phone, and it will…
Scan of a Smallrig Sony ZVE10 Camera Cage for reengineering Important: The 3D Print Resolution Version is for this camera handle : https://www.printables.com/model/1134961-smallrig-camera-handle-with-hot-shoe-adapter
Enforcement part for "The100" v1.1 printer. I had trouble with the bed leveling being bad, even if I just leveled it just before I printed. After a lot of tries I finally realized, that the printer pressed apart the frame at the front as…
Desk mount with 4mm screw holes for the FiiO E10K Olympus 2. I used some 3.5mm wood screws Print with a brim if it doesn't stick to the bed.
This is a Socket that holds your E10 Head Screw with a Magnet in place. This Socket fits on every ¼ inch Ratchet and extention. You also need a 5 mm Magnet with a length between 10 mm and 14,5 mm and a M3 x 4 setscrew. This is what makes…
This is a Bluetooth sliding keyboard case for the Samsung Note10+. This is the first complete iteration of this design, but it still requires a decent amount of refinement to be where I'd want it. Issues/Action Items: The keyboard bezel…
The bearing grinder jig used to grind the bearings used in the VDE100 extruder. Remixed from Tom Brazier's tool to change the thread to fit my DREMEL 3000, though I believe most Dremels use the same thread (¾-12) so it likeley fits most…
Holds an extra battery and SD card. 8x 1x10mm magnets are used. They are pretty hard to press in, so glue is not really needed. I printed with 4 walls, 4 top/bottom, and 10% infill and it came out to about 300g and 5 hours of print time.
This is a custom accessory designed for the THE100 3D printer . It consists of two parts: A spacer A MicroProbe mount The design is optimized to securely hold a MicroProbe sensor in place. It includes two slot for inserting a melting nut…
I created this model to hold my Canon LP-E10 batteries in place on the charger because the spring would push the battery up and prevent it from charging. This Model was created in Fusion 360. Enjoy!
I created this model to hold my Canon LP-E10 batteries in place on the charger because the spring would push the battery up and prevent it from charging. This Model was created in Fusion 360. Enjoy!
Another fan shroud for the Anet E10 with a bltouch mount and 5015 blower. Print Settings Printer Brand: Anet Printer: E10 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 50% Filament: SmartMaterials PLA Glitter green Category:…
Español: Es un soporte simple para el cable de la Anet E10 para que no choque con el cable del final de carrera y así no haya impedimento en el libre movimiento de la cama. English: It is a simple support for the cable of the Anet E10 so…
It is a small help to be able to print TPU or flexible filaments with the extruder of the Anet E10 without this tightening it too much and we can have complications in our prints. Version v2: Fix distance between body and screw. Fix…
UPDATE 04.2025 I added single mount for rack19", If you need change site, simply use mirror in slicer. ABS+ Eryone v3 redesigned space on S8. The name itself indicates in the file for split in slicer, I filled in the gaps X in the middle…
For the best mechanical properties, it’s best to print with ABS/ABS+/ASA. Additionally, I don’t recommend mounting one directly under the other. Both the switch and Route10 can get quite warm :) Unless you have a fan to cool these…
This is a very simple change that allows a string to be added so this tank can be a keychain or bag tag. It is also scaled down, a lot. I printed it with a 0.2mm nozzle and 0.08 mm resolution and it works, but it is very delicate, I…
9v battery cover/lid for a Pelouze PE10 balance. Required some sanding for me & it doesn't line up perfectly in the back but it worked so I left it as is. Print Settings Printer: Corexy Rafts: No Supports: Yes Resolution: 200 Infill: 15%…
Found that my little extruder could not keep up with The100s speeds, I was getting skipped steps. Had a M4 Mobius kit, and figured I would give it a shot. I know the square nuts will not be as popular, but those are the bolts I had…
A buddy of mine called me needing an E-10 socket for a project. Not having one, and not finding any available at the local hardware store, I decided to print one. Did a little TinkerCad magic in the car on the tablet and then sent it over…
We play Phase 10 a lot with our children, and we've noticed that there is often confusion about which phases have already been completed, especially when playing randomly instead of in order. For this purpose, I have created scoreboards…
We play Phase 10 a lot with our children, and since we started using homemade paper scoreboards and, more recently, individual phase indicators for each player (which can be found in my profile), we needed a complete storage solution.…
We play Phase 10 a lot with our children, and since we started using homemade paper scoreboards and, more recently, individual phase indicators for each player (which can be found in my profile), we needed a complete storage solution.…
M3 offset couplers to mount a Terasic DE10 to a JammASD. Modelled with 4.1mm holes which should result in a 4mm hole after shrinkage etc to suit M3 brass inserts that have a 3.9mm lead. These are the inserts I used >…
I made this for a vintage car restoration for the signal indicator lights on the dash. This could also be used as an indicator light on any control panel. It will fit into a ¾ inch hole and is 1.5 inches long. There are two versions of…
I needed a model of the DE10 Nano for a future project. No one had posted one yet so here you go. This is not meant to be printed but used for creating cases and the like. Category: Gadgets
When going large scale diy 3d printer, the corexy style is not great because of the extremely long belts. Thats why I found the Riff buil very interesting. But i want to go fast and have great cooling. The Riff has the x motor mounted on…
This mod consists of a PLA bayonet style adapter as well as two TPU 95A gaskets, and another TPU cover that replaces the original fabric. One gasket replaces the original filters, while the smaller one seals between the adapter and the…
So After I bought a tripod with an arcaswiss mount, I was annoyed since my zve10 didn't have an arcaswiss mount allowing to be attached on portrait, so I remixed this thing to be screwed on the cage's sides uses 2 1/4x10 screws
E-100 Tank Model 1:72 This model represents the German E-100 super-heavy tank with several build options: Tracks & Skirts No-skirts version : tracks are attached using 4 connectors . Full-skirts version : tracks already have built-in…
This component is a new or updated version of a model for my “Skadis charge-wall project.” Some models now come in two versions - one with and one without engraved text - and, for models that need it, with or without a front split to make…
Snap-fit DIN rail mount for the TP-Link TL-POE10R PoE splitter . Designed for horizontal printing with no supports required. The splitter should be oriented so that its output faces the spring-latch side of the DIN rail clip.
Since I'm currently finishing off the building of my The100 tank 3D printer and using this electronic tray, I've designed this custom-fit cover/lid for it. This design ensures your electronics are protected from dust and debris . The…
With this base, a standard low-voltage lightbulb with E10 base can be used to light up the 75mm planet lithophanes. The length of a typical E10 bulb places the filament almost perfectly in the centre of the lithophane sphere. The shroud…
Card holder I designed for Phase10 game cards. Will hold 18mm thick deck on each side. Also has insets for magnets and M3 screws to hold the lid on (lightly. I wont support the weight of the deck upside down). You can print multiple…
Made to cover the ZV-E10's top mic array so dust/debris don't get in during normal photography-only use.
Screw-mounted wall stand for Sony ZV-E10I A lens can be mounted while the camera is on the stand Screws in (M4)
Weller WE1010 IKEA Skådis Board Mount (WIP) This Skådis-mounted variant of the Weller WE1010 holder was created at the request of another user and is provided as a work in progress until real-world fitment is confirmed. This design…
#### Update 3/12/25 : Model now oriented properly for power cutout (was mirrored before, apologies to those who printed the previous version) A safe home and easy access for your soldering station ***Includes cutouts for power and…
I was looking for a way to move/store my Weller WE1010 soldering station, without moving the 2 parts individually. So I created this simple solution. Print with 4 walls and 42% infill minimally, as the left part is quite heavy.
This is a custom backplate adapter for the Elgato Prompter, designed specifically for the Sony ZV-E10 with the kit lens. It allows a clean, stable mount of the camera behind the prompter while keeping the setup compact and well-sealed. ✨…
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
I recently repaired a Technics SA-400 receiver and, in the process, converted the lighting to LEDs. Since suitable BA9S LED bulbs are quite expensive (at least in my country) and installation in the spring-loaded sockets is very fiddly, I…
The socket fits an E10 light bulb, the type commonly used in old flashlights. Sometimes also called Miniature Edison Screw or MES or MES10. The socket and base are printed separately and need to be glued together with super glue. The base…
I had this printed at Detroit 3D Manufacturing via Craftcloud in black PETG at 60% infill (to give it some weight). I have the original E10K (micro-USB), but there is a newer E10K-TypeC (USB-C) which I have not tested, but I believe it is…
I wanted a clean solution to fill in the hole left by removing the DC-In jack in my PSP Street after doing a USB-C mod, so I made a quick model that just screws in where the original port went. Should also fit PSP-2000 and 3000 models…
He querido ultimamente mejorar la experiencia con mi camara de fotos . Diseñar mejores agarres , modificaciones etc. Para ello comencé con el modelado de la cámara , la subo para que la comunidad lo tenga más facil para hacer mods para…
I needed to accommodate A/V Pro v9.2 IO board and AV Board v1.2 so I made this remix. Print as you did with Side2, and everything should work fine.
Recommended to print top-down so they are nice and flat. I used a smooth PEI sheet and PLA to be extra sticky. Just lay them on top of the buttons and put the lid on the cube, and you're good to go!
Primera versión del agarre mejorado para la sony zvE10. El modelo esta pensado sobre todo para personas con manos grandes , o que prefieren un agarre mayor a la hora de sujetar la cámara, en especial esta zvE10 ya que es pequeña. El…
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
Remix of a remix of a remix of an openGrid Brother P-touch label maker. Needs opengrid-multiconnect-directional-snap x2 opengrid-multiconnect x2
Полка для роутера. Посадка плотная, есть отверстия для провода питания и для usb порта.
I needed to use a right-angle USB cable to keep things clean and not sticking out the sides of the cube, so I made this remix. Print as you did with Side1, and everything should work fine. Made to work with this model: I used this USB cable
I really wanted to have an all-in-one type console that had an NFC card slot to launch games and this ejector mechanism is great. I combined it with the footprint of the DE10 Nano stack - MiSTer project CUBE case. To keep things very…
a simple extension to expand this cube rack from 10 inches to 19 inches
With these model you can hold your cables in the Sony ZV-E10 camera.
After years of wearing a Casio watch I've developed an allergy to the stainless steel caseback (Nickel) so I made this cover. The frame fits on over the stock caseback and holds a piece of adhesive vinyl (car wrap) to cover the back of…
Update: I have improved and clean up the design a little so it will be better for printing. This thing is to adapt a standart 5 mm LED to the "Edison 10 socket" (E10) mostly used in old bicycle lights. I use it to re-equip old bicycle…
so konzipiert das nur der Trichter mit stützstruktur gedruckt werden kann alles andere ohne. Griffe 2 mal drucken und mit M3x8 an den Deckel befestigen Trichter wird auf dem Korpus geklebt.
I'm a couple of weeks into my Weller WE1010 soldering iron. I’m very happy with it, but it shares the same problem as its predecessor: it’s great when it’s sat on the bench, but it’s not all that easy to move around. My workshop has to be…
I wanted to create a printable version of the included foam stand that Hifiman provides with their egg-shaped headphones. I traced the original foam and created a 3D model, added a little hanger for the headphone cable. Print settings:…
This is very much so a WIP, please keep that in mind! This is my take on redesigning the electronics enclosure for the Anet E10 3D printer. It features mounts for an SKR V1.3/4 board, Raspberry Pi 3 as well as cable management & an…
