CO2 Sensor TTGO 45-Degree Desktop Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom 45° desktop case for LilyGO TTGO T-Display & SCD30 CO2 sensor. Optimized airflow for precise readings.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
CO2 Sensor TTGO 45-Degree Desktop Stand
A modified 45-degree desktop stand and case designed for the LilyGO TTGO T-Display ESP32 and the Sensirion SCD30 CO2 sensor.
This case houses the electronics perfectly while angling the display at a 45-degree angle for easy reading on a desk or nightstand.
🌟 FEATURES:
Perfect Viewing Angle: 45-degree tilt makes the display easy to read while sitting at a desk.
Optimized Ventilation: Features an open back/grid design specifically to allow maximum airflow to the SCD30 sensor.
Button Access: Designed to allow easy access to the physical buttons on the T-Display board.
USB-C Port: Clean cutout for powering the device.
🛠 HARDWARE REQUIREMENTS:
1x LilyGO TTGO T-Display (ESP32)
1x Sensirion SCD30 Sensor Module
Jumper wires for I2C and power
Note: This case is meant to accompany the "CO2 Sensor TTGO Custom Dashboard" project (https://github.com/Felix-Chaos/Co2-Sensor), which integrates these sensors seamlessly with Home Assistant via MQTT.
🖨 PRINTING INSTRUCTIONS
Material: PLA, PETG, or ABS
Infill: 15-20%
Supports: Depending on your printer's bridging capabilities, you may need minor supports for the USB cutout or the display window overhang.