Prusament OpenPrintTag Inner Adapter for use with USS Drybox non-stick needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 Piece adapter to insert the OpenPrintTag sticker into the non-NFC spools and use them with the USS Drybox
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
WARNING: You need to cut a little of the OpenPrintTag sticker to use it with this adapter. However, as you don't cut the antenna nor the electronics it's safe to do it, but I'm not responsible if you mess it up. Do it at your own risk.
I've designed this adapter to be able to insert the OpenPrintTag in the inner side of the Prusament spool holder without the need to stick it.
This adapter consists in 2 pieces, one that fits into the spool and one that's the sticker shape. Both pieces are connected by pressure creating a sandwich with the sticker in the middle.
Print the parts with PETG, I've used a 0.4 high flow nozzle with 0.20mm STRUCTURAL profile
First you need to cut the inner circle of the sticker:
Then you put the sticker on the Part1:
Now you can put the Part2 over it and press to get them connected:
You only need to cut the sticker excess with your favorite blade and discard the leftovers, Part1 and Part2 have slightly different diameter to help you to use the blade:
Now you can align it with the spool and press it to snap the 4 connectors:
You have it!
I hope this helps you to reuse the old filament spools in a very transparent way