1 / 1
Brake reservoir holder for Suzuki GSX-R 600/750 2008-2010 K8-L0
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder for brake reservoir
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My original reservoir bracket broke while riding, so I had to quickly come up with this design. It has already covered 800 km with me and everything is fine. It sits lower than the original. Printed in PETG, but I think ABS/ASA would be a better choice. Minimum 4 walls for strength. To mount the reservoir, you need to transfer the rubber bushing from the original bracket or use a new one.
