Birdhouse 002 - Mid-Century Modern Birdhouse & Succulent Planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modern mid-century birdhouse & succulent planter
- Ocena
- 5 / 5
- Polubienia
- 216
- Pobrania
- 191
- Wydruki
- 1
- Wyświetlenia
- 2083
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
As my next installment of birdhouse, I thought I'd go with a modern mid-century look and incorporate planters into it!
So here it is! Print it! It's neat!
Printing Instructions:
Included are two versions of the roof. One without a planter and one without. The option with the planter does require supports.
When placing this outside I recommend using materials such as PETG, ASA/ABS, or Polymaker's HT-PLA.
Feel free to scale up if you feel it needs to be bigger. The clearances should be just fine.
While the 3mf files provided indicate that you need a multi-color system to print the rock wall, it will still look fantastic in a single color.
Layer height: 0.2mm
Supports: The optional roof that incorporates a planter on top does require supports
Wall loops: Recommended 4-5 wall loops when printing with lighter color filaments. Everything else will do fine with 2-3 wall loops
Assembly:
Please refer to the provided assembly guide for instructions
Filaments I used:
Polymaker Matte Black PLA
Push Plastic Desert Tan PLA
Bambu Lab White PLA Basic
Bambu Lab Ash Gray Matte PLA
Bambu Lab Nardo Gray Matte PLA
Bambu Lab Dark Chocolate Matte PLA
Bambu Lab Cocoa Brown PLA Basic
For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on Patreon, prints of this model can be used for commercial purposes.
Feel free to join my discord for additional support, questions, or suggestions!