EGO Z6 Bagger Weight Bumpers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU Bumpers for EGO Z6 Bagger Front Weights to protect whatever you run into!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
I have run into several things on errror with my EGO Z6 Mower (e-steer), and the front weights make it even more of a danger. I designed these to be printed in TPU and cover the outside and corners of the weights with TPU rubber. Simply remove the weights, add this cover, and re-bolt into place. Adding a washer will help to keep the nut from tearing the TPU, as that portion of the TPU is only 1mm thick so that changing to longer bolts is not required. I printed in EGO green TPU, but PLA would also work. Supports seem necessary, and I used the automatic tree type found on Bambu Studio or Orca Slicer.
Also, I have embossed the EGO logo on top, but if you prefer a non-branded version, let me know and I can publish versions without.
If you have a Z6 with the bagger, and have the front weights on, I recommend these. However, if you feel it needs improvement, please feel free to re-mix, so long as you share your version here.
I printed with generic TPU on a Bambu Lab P2S, with 15% cubic infill and auto tree supports. Each side takes about 11 hours to print. They could be printed in PLA or PETG, but I do recommend TPU.
Other EGO Z6 models: