EGO Z6 Bagger Weight Bumpers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU Bumpers for EGO Z6 Bagger Front Weights to protect whatever you run into!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
I have run into several things on errror with my EGO Z6 Mower (e-steer), and the front weights make it even more of a danger. I designed these to be printed in TPU and cover the outside and corners of the weights with TPU rubber. Simply remove the weights, add this cover, and re-bolt into place. Adding a washer will help to keep the nut from tearing the TPU, as that portion of the TPU is only 1mm thick so that changing to longer bolts is not required. I printed in EGO green TPU, but PLA would also work. Supports seem necessary, and I used the automatic tree type found on Bambu Studio or Orca Slicer.
Also, I have embossed the EGO logo on top, but if you prefer a non-branded version, let me know and I can publish versions without.
If you have a Z6 with the bagger, and have the front weights on, I recommend these. However, if you feel it needs improvement, please feel free to re-mix, so long as you share your version here.
I printed with generic TPU on a Bambu Lab P2S, with 15% cubic infill and auto tree supports. Each side takes about 11 hours to print. They could be printed in PLA or PETG, but I do recommend TPU.
Other EGO Z6 models: