Liczymy pasujące modele…
This is not my model or my images, credit to Muzz64 on Thingiverse . Quoted from his item details: "Fish Fossilz are an amazing one piece print that wriggles, twists and bends in all directions. It's an easy print that only uses about…
35mm film adapter parts for Mamiya RZ67. I use the 220 film backs for this. Tested with Kodak and Ilford cartidges. You can use the included uptake spools or spool into a second film cartridge. Printed in PETG with a 0.6mm nozzle at 0.2mm…
This is for an airsoft model and will literally not work on the real thing, which has a totally different mounting system, don't waste your time. This is a quick and dirty buttstock rail adapter for the KWA/KSC VZ61 GBB/GBBR Airsoft Toy.…
I haven't printed this model yet. I'll update this section as soon as I print/got this printed. Length: 250mm Height: 50mm
Frame plugs for Yamaha FZ6, to stop filth from entering. Video in greek: Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: 3D Prima TPU Black Notes: Print in Flexible filament…
This is a model to be able to hold my Logitech Z625 speakers on a vesa monitor arm.
Rear IO Shield for the MSI Pro Z690-A non-wifi variant
This is a remix, adjusted and optimized for TetherPRO cable and Nikon Z6 Mark II
Just a Keychain for a Kawasaki Z650. Print Settings Printer: BambuLab X1C Rafts: No Supports: No Resolution: 0.16mm Infill: 50% Filament: 3DJake Category: Keychains
Kawasaki Z650 (2020) turn signal adapters The available after market adapters did not fit (pictured). Remix of https://www.thingiverse.com/thing:3535096 Category: Vehicles
Used in the Soviet army since the early 70's. DPP40 stands for Desantniy (airborne) Pontoon Park, 40t, what is the maximum vehicle weight, the system can carry. I’m not a military expert, but my first idea, when reading about was – if…
XPan, but SLR :D I can't afford buying XPan and wanted to have more framing control than rangefinder cameras offer, so after a lot of experimentation I found out a way to shoot 6x17 (or more like 24x65) on my Mamiya RZ67 with 220 back.…
Finder Mask for framing 24x68 format images with the RZ67. Works with waist level or RZ67 AE prism finders. Printed in PETG and 0.15mm layer height with a 0.4mm nozzle.
Nozzle attachment for the Shark Vertex vacuum and presumably other models using this specific trapezoidal nozzle shape.
Two types of Z50 and Z60 cogwheels for use with fischertechnik. The cogs will mount with the regular nr 31014 or 31015 hubs to a 4mm axle. To make it easier to print without support, I also added the models with one flat, non-faceted…
Replacement tappet plate for airsoft MP7, VZ61, and MAC10. Some filing may be needed Update 12/28/18: Edited to better mimic original tappet plate Category: Sport & Outdoors
This is a 3D Printable motorcycle tank cap for a Kawasaki KZ 650 SR tank. The original is expensive and very hard to come by, so I decided to 3d print one instead. Hopefully this could be a template mechanism that can be remixed to suit…
Drive tray for HP Z600, fits others from the Z series of PC's.
You lost your HP workstation mounting screws? Just print 4 of these :D It's not perfect, but it works :)
THIS THING IS PROVIDED "AS IS"! USE IT AT YOUR OWN RISK!!! I'm not responsible if your dear camera hits the ground! This is a two-piece adapter. Main body can easily withstand stretching load. It takes bending but may degrade if you bend…
HP z600 workstation Front 5.25" bay grill and 80mm fan mount to match de machine design. v1 - 18/02/2021 Grill and fan mount made in 2 files to avoid supports. Just print, align and glue ;) v2 - To-do One piece with minimal supports. Easy…
fischertechnik Gear Z20 and Z60 for metal flange coupling. Depending on the inner diameter of the flange coupling, these can be used on 4mm axis DC motors (e.g. ZGB25RP and JGA25-370) or 5mm axis DC motors (e.g. Nema stepper motors)…
Install it based on my second photo. Original footpeg bolts will work. If you decide to print it, I'd greatly appreciate if you posted your make. Happy printing.
The cap bottom has a diameter of 9.4 mm. I'd recommend to print it with the head placed on the build plate, so no support is needed. You also should print one for testing - i had some trouble with my TPU shrinking a bit, so it was too…
My son recently bought a very low time 2019 Kawasaki Z650. When we went to do the first oil change and remove the factory installed filter it was very difficult to remove( I think it was installed dry). My cheap set of cast aluminum oil…
This mount mimics the geometry of the Logitech Z623 speakers — engaging the existing screws to make for a clean mount without damaging the speaker body. Remove the rubber feet from the speaker's underside. Use M3x50 screws to fasten the…
This is a model of this part (Part 37) but specifically only the rubber piece that breaks/dries out frequently. Credit for this model is hard to pin down, but this was shared on the HRC Discord by user:sindrathion - No one is taking…
Version 1.0 of a BLTouch mount I have built for the Lulzbot TAZ6 in order to provide much more reliable ABL. Category: 3D Printer Parts
This is a replacement jaw for the Wolfcraft Spring Clamp FZ40 and FZ60. To install the jaw just remove the black pin by pressing it out with a small screw driver. The print needs no support. I printed it with 0.15mm layer height and a…
Parametric SCAD model of the Mamiya RZ67 camera bayonet from an original macro adapter ring. Reference high-contrast photo of the original included. Tip: check if your slicer does not make lugs too thick (too tall) because of the layer…
Adjust the scale to fit very tight and print with the over hang facing the bed and use supports. It may come out a little tight and will not let the stock fold all the way and lock in so I would use a heat gun and slowly heat up the part…
Replacement bushing for AEPs. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 100 Category: Sport & Outdoors
This is a direct replacement and modification for the hop up arm on the Tokyo Marui VZ 61 Scorpion AEP and it's clones (JG, Well etc). This part is tested and working in my JG. I have modeled several different nub sizes for various…
Photos are licensed CC BY-SA 4.0 International by Aleph Objects, Inc. This is a 3mm acrylic laser cut enclosure for the Lulzbot Taz6 enclosure. It uses the corner brackets to hold it in place and encloses the whole printer. If you don't…
When you use Nikon Z6, Z7, Z6II or Z7II with Z lenses and FTZ Manfrotto plate cant be on camera. If you use this, you can use it all the time. This is model used on your own risk. I tested it with Nikon Z6 II and lens under 500g. You need…
Dave and I worked on a case for a mechanical keyboard (DZ60) where the wrist angle was incorporated and it had room to store the cable. There is a depression on each of the four bottom corners for anti-skid feet. Unfortunately they are at…
Don't forget to "Like" & check out my other cool designs. Please, Posting a make when you print this would really help me! A handlebar bolt cover for Yamaha FZ6-N and FZ6 Fazer. I tried it with S1 model, but it might as well work for the…
Tercer iteracion sobre el diseño NKH, ahora mas amplio (65mm) y aereado que nunca! Se incluye una nueva version doblemente roscada para los soportes de las almohadillas (PAD_BR) Revise las presicion de su impresora e imprima deacuerdo a…
Adapter between Vz61 "Scorpio" magazines from Well (or from Tokyo Marui) and the "Odin" speedloader. It is better to fasten them together using any self-tapping screws with a diameter of 3 mm and a length of up to 17 mm. You will also…
corrects the angle for the stock, requires disassembly and replacing the correct part, i din't use the screws as they are not necessary if you have a good press fit, might need sanding or building up with superglue and paper to achieve…
V2 of this prefilter is currently under development. El prefiltro está compuesto por dos partes y no requiere de hacer ninguna modificación a la moto. Respecto a otras versiones comerciales mucho más caras este diseño tiene la ventaja de…
if anyone need a tappet plate to mp7, mac10, skorpion aep i made a remix on a model in thingiverse that works fine now tested now 3 mags i printed in petg but i recommend to use nylon and two little metal nails (the arrows on first…
Created a tank key for IDO Seven D toilets. Fits to the toilet's two sided flush button and opens the rod that needs to be remove before opening the tank. Has a 15mm hex, with a bit holder at the bottom. IDO Z6205700001 IDO 5731280 WC…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
Trainer for CRKT HZ6 Original design by James Williams
I recommend getting this printed professionally with HP MJF or Shapeways steel to get high accuracy and strength. Mag catch area slightly larger to help feed magazine better but can be sanded to fit your mags/gun if its too big. Category:…
FZ6 Naked Moto LED blinker indicator adaptor hole 10mm Printables in PETG or ASA/ABS Need to print 2 adapter for a single blinker to fill the original hole as sandwitch
Stehlager zz608, Bearing_Mount Category: Hobby
Plastic finisher fits over radiator cap in a color of your choice. Should fit radiator cap on Honda SCL500 and Rebel plus Kawasaki Z650. Many other motorcycles may use the same radiator cap? No Support material required. Prints very…
Print instructions: This should print without supports. I was able to print it laying on the large flat side down. Bike Instructions: Remove the seat Remove the four 4mm bolts from the rear trim Remove the rear trim, gently pulling on the…
Stehlager für AluProfil 30x30, Bearing_Mount, zz608 Category: Hobby
Biting Ratz by Muzz64 on Thingiverse. Press up on the tail to open its mouth. You can also print the “Bitten Heart” from my profile.
Tool designed to facilitate the removal and installation of the oil filter for the motorcycle.
Speedo/Tach mount modeled for 2004-06 Yamaha FZ6, Model requires 4x 1/4-20x2" (short riser) or 1/4-20x2.5" (tall riser) bolts, 4x 1/4-20 nuts, and factory hardware to mount speedo/tach into the mount. Includes 2 sizes of risers and is…
Remix of the Olympus E-M1 holder, can fit E-M1 mark ii, Nikon Z6
In the Z6 the plastic tab to keep the milkfoamers steam pressure in has proven to be too slim to resist constant use, this part keeps it locked down so it cant break, or if already broken keeps the cover from bending away and releasing…
I was tired of my mower deck banging and rattling around while driving across the yard at higher speeds. Much of the rattle comes from the bare metal rod that the front of the deck hooks to, and there is more rattle in the back hanging…
Layer: 0,2mm; Infill:50% Laser power 0,5W Screws 2xM2
This is a simple design and has a single function, to provide a tray for the Pine64 Quartz64 Model B Version 1.3 SBC to sit in. It is intended to protect the bottom of the board to help prevent grounding or damage while in use. There are…
Since I have a small desk and every inch of space counts, I was looking for a way to move my speakers off the desk. The combination of these two remixed models seemed like the best solution. You will need to print: 2x…
Replacement bracket for VZ61 Mag Release. Category: Sport & Outdoors
The Counterpillow model could not house a pcie long card. So here it's a redefined case to allow them
Release button for the L-Grip Holder RZ for Mamiya RZ67 that always gets lost but is impossible to get. Empiricus@Dremomys Print Settings Printer Brand: Wanhao Printer: Duplicator 6 Rafts: No Supports: No Resolution: 0.150 mm Notes: ABS…
A simple model of the Phinsitech Z6 MP3 Player I made.
Simple plotter head for TAZ6 (and maybe other versions too). The "v1" design is loosely based Tech2C's "over-engineered" plotter design for the Hypercube printer (also here on thingiverse ). I basically re-used his pen holding cart…
Here it is a verbatim copy of the original one created by Counterpillow (also next info is borrowed from https://wiki.pine64.org/wiki/Model_A_Acrylic_Open_Enclosure ) User:CounterPillow has created an alternate 3D-printable top plate…
General This is a replacement for the no longer available Honda NTV650 headlight brackets 61316-MZ6-000, 61317-MZ6-000. The original brackets are stamped, so left and right side are different. This one is just flat, so it doesn't matter.…
Enlarged the square a bit and added recesses for the mounting pins on the back of my Logitech Z340 left and right speakers. Should also fit the Z640 speakers. Printed in PETG with 3 walls and 15% infill. Rest of the parts are from…
Just a little shroud to cover the yellow caps on the EVGA Z690 classified board. Printed in Carbon fiber -PETG with a 0.25mm nozzle, 0.1 mm layer height.
Carrier/Storage for EGO Z6 mower for under $40. If you have the bagger for your Z6, use these mounts to attach a $30 Storage Footlocker to the H rack when the bagger is removed. I used #10 ¾" bolts with lock nuts (about $5 total, from…
Wanted to place my eBOX dryer on top of the frame. Simple but effective.
I print without every other leg to save on filament. It prints without support. step file has all the legs.
Bracket to convert Kawasaki Z650 2017 headlight to universal round headlight. Intended for 41mm fork diameter. Could be used on any motorcycle with 41mm fork diameter.
I own an Ego Z6 mower and looked a while back and didn't see any covers for the charger. I finally got around to make a cover and I like the way it turned out.
Commissioned by a friend for his Lanchester's Lucas distributor, specifically the DVX4A but the Lucas part number 408945 is listed as fitting all the other distributors shown in the title of this model. Apparently there are a lot of those…
The following is the original text from thingiverse: Summary Snakez are a super bendy flexible fun print-in-place design. They should be ready to wriggle straight off the build plate (as soon as the raft is removed). No support required…
Motorolla Z6 Ring replacement
Clip For Vacuum Cleaner Electrolux Z65 was created as spare part for broken one. It was printed from PETG with layer 0,35mm. There are added support strips which should be removed from final printout.
This is an adapter to mount the E6B2CWZ6C omron (clones) encoder to a 34HS59-5004S stepper motor. You need a narrow shaft coupler (for example the included model but something better is recommended). Take some time to align it absolutely…
0.8 MOD gear 60T (for the original focuser wheel of the WO Z61-III telescope), which can be applied for focus automation.
I have run into several things on errror with my EGO Z6 Mower (e-steer), and the front weights make it even more of a danger. I designed these to be printed in TPU and cover the outside and corners of the weights with TPU rubber. Simply…
If you use your Z6 for commercial, or just want to put a flashing yellow light on your mower, then this mount is designed to attach to the top lid of the bagger via 2 small mounting holes. There is a 4" x ⅚" metal mending brace from…
I want to mention upfront that this is one of the first models of this scale and complexity that I’ve made. As a result, it isn’t very well optimized, and there are likely quite a few design flaws in the CAD files. I’ve attached two CAD…
I love my Z6 e-steer, but was frustrated with all of the rattles. I have made models to print in TPU to greatly reduce the bangs and rattles. This one is for the bagging unit. These pads will make it so the mounting pins cannot be…
The Intel Z690 chipset is notorious for running hot, yet ASUS chose a silent, passive heatsink solution rather than active cooling for the gaming market. For long-term reliability, actively cooling the chipset can help extend its…
Biting Ratz by Muzz64 on Thingiverse. Press up on the tail to open its mouth. You can also print the “Bitten Heart” from my profile.
Carrier/Storage for EGO Z6 mower for under $40. If you have the bagger for your Z6, use these mounts to attach a $30 Storage Footlocker to the H rack when the bagger is removed. I used #10 ¾" bolts with lock nuts (about $5 total, from…
ACEFAST Z6 power supply wall mount FreeCAD file attached
Since I have a small desk and every inch of space counts, I was looking for a way to move my speakers off the desk. The combination of these two remixed models seemed like the best solution. You will need to print: 2x…
If you use your Z6 for commercial, or just want to put a flashing yellow light on your mower, then this mount is designed to attach to the top lid of the bagger via 2 small mounting holes. There is a 4" x ⅚" metal mending brace from…
This is a remix of the only speaker mounts I liked for these. I remixed them to sit on the back of my samsung tv.
This was inspired by retro keyboards, and squashy boy's video about concrete in keyboard making. It can be printed and used as is, or can be used to make a mould for resin/ concrete. It has been seperated for printing. they can be…
Blog post: https://ttvl.co/darkroom/rz67-focus-gear-stl/ Version PRO II of the RZ67 features a delicate fine-focus knob that operates through a gear reducer (this one). It is quite fragile and prone to breaking easily, resulting in a…
I have an EGO Z6 ZTR mower. Works well for my 3 acres. But it has a towing plate on the back that will, I know, bite my shin some day. It is essentially a plate with a hole in it that juts out off the back of the mower. It really is only…
Simple stand for the additional accessories/nozzles that come with with Shark Vertex Pro IZ662H. Accessories fit but are not tightly held in place, they have some wiggle room to avoid stressing the accessories and the stand. Different…
I have a 2003 Ford Focus ZX3. The pin holding hatch trim/package tray string has broken several times. I've bought replacements but they are always hard to find and expensive on ebay. It is a poor design. Purchasing a new one is about…
