1 / 3
Mirror Hole Plug Z650 | Spiegelabdeckung Z650
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap to close the hole after removing the original Z650 mirrors.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 238
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The cap bottom has a diameter of 9.4 mm.
I'd recommend to print it with the head placed on the build plate, so no support is needed.
You also should print one for testing - i had some trouble with my TPU shrinking a bit, so it was too lose. You can just rescale it to your needs in your slicer.
Printed with TPU:
- >40 % infill
- 3 walls
