Dyson Car+Boat Compatible Long Crevice Nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printable long crevice nozzle for Dyson vacuum cleaners.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A long crevice nozzle compatible with Dyson-style vacuum attachments.
The narrow-angle tip is useful for cleaning tight spaces, corners, gaps between furniture, car interiors, baseboards, shelves, and other hard-to-reach areas.
The nozzle includes an integrated locking latch and is designed to print as a single piece. The latch area uses reinforced geometry with internal ribs and a gradual transition to improve durability when printed on FDM printers.
Features
Dyson-compatible connector
Integrated locking latch
Long, narrow crevice nozzle shape
Angled nozzle tip
One-piece print
Reinforced latch area
Suitable for household, workshop, and car cleaning
Print Settings
The table below shows the print settings used to print the model.
Property | Value |
|---|---|
Filament | PETG |
Infill | 20% |
Walls | 4 |
Layer | 0.20 mm |
For best latch durability, use good layer adhesion settings. Avoid silk, matte, filled, or very brittle filaments for the latch.
Notes
This is not an official Dyson part.
ℹ This model was inspired by another model, but it's not a remix. The nozzle was designed completely from scratch (no reverse engineering).