Dyson Car+Boat Compatible Long Crevice Nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printable long crevice nozzle for Dyson vacuum cleaners.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A long crevice nozzle compatible with Dyson-style vacuum attachments.
The narrow-angle tip is useful for cleaning tight spaces, corners, gaps between furniture, car interiors, baseboards, shelves, and other hard-to-reach areas.
The nozzle includes an integrated locking latch and is designed to print as a single piece. The latch area uses reinforced geometry with internal ribs and a gradual transition to improve durability when printed on FDM printers.
Features
Dyson-compatible connector
Integrated locking latch
Long, narrow crevice nozzle shape
Angled nozzle tip
One-piece print
Reinforced latch area
Suitable for household, workshop, and car cleaning
Print Settings
The table below shows the print settings used to print the model.
Property | Value |
|---|---|
Filament | PETG |
Infill | 20% |
Walls | 4 |
Layer | 0.20 mm |
For best latch durability, use good layer adhesion settings. Avoid silk, matte, filled, or very brittle filaments for the latch.
Notes
This is not an official Dyson part.
ℹ This model was inspired by another model, but it's not a remix. The nozzle was designed completely from scratch (no reverse engineering).