1 / 1
eBZ DD3 IR Bracket for CTS WiFi IR SMI V32 — zdjęcie 1

eBZ DD3 IR Bracket for CTS WiFi IR SMI V32

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An IR Bracket for eBZ DD3 meters in combination with CTS WiFi IR SMI V32 sensors.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Compatible with IR sensors available at https://www.christians-shop.de/Smart-Meter

The IR sensor should fit snugly into the printed part. If it does not, simply secure it with a cable tie.

If you're wondering why you should use the top infrared port instead of the front one: The top IR port also provides the voltage of all three phases, whereas the front IR port does not.

Suitable Tasmota script for eBZ DD3 2R* DTA - ODZ1 devices:

>D
>B
TelePeriod 60
=>sensor53 r
>M 1
; Device: eBZ DD3 2R* DTA - ODZ1
; protocol is D0 OBIS ASCII
; 9600@7E1 for OP-type devices, 9600@8N1 for SM-type devices
+1,3,o,0,9600,SM,1
; Zählerstand zu +A, tariflos, 
; Zählerstände Auflösung 10 µW*h (6 Vorkomma- und 8 Nachkommastellen)
1,1-0:1.8.0*255(@0.001,Energie Bezug,Wh,Energy_Import,8
1,1-0:2.8.0*255(@0.001,Energie Export,Wh,Energy_Export,8
; Summe der Momentan-Leistungen in allen Phasen, Auflösung 0,01W (5 Vorkomma- und 2 Nachkommastellen)
1,1-0:16.7.0*255(@1,Leistung gesamt,W,Power_Total,18
; Momentane Leistung in Phase Lx, Auflösung 0,01W (5 Vorkomma- und 2 Nachkommastellen)
1,1-0:36.7.0*255(@1,Leistung L1,W,Power_L1,18
1,1-0:56.7.0*255(@1,Leistung L2,W,Power_L2,18
1,1-0:76.7.0*255(@1,Leistung L3,W,Power_L3,18
; Spannung in Phase Lx, Auflösung 0,1V (nur über MSB)
1,1-0:32.7.0*255(@1,Spannung L1,V,Voltage_L1,1
1,1-0:52.7.0*255(@1,Spannung L2,V,Voltage_L2,1
1,1-0:72.7.0*255(@1,Spannung L3,V,Voltage_L3,1
; Statuswort, 4 Byte Information über den Betriebszustand, HEX string
; tasmota can decode one string per device only!
;1,1-0:96.5.0*255(@#),Status1,,96_5_0,0
;1,1-0:96.8.0*255(@#),Status2,,96_8_0,0
; Geräte-Identifikation, Nach DIN 43863-5 
1,1-0:96.1.0*255(@#),Identifikation,,Meter_ID,0
#

Tagi