LayersFactory
Zgłoś model
1 / 1
Spring Announcement - HueForge — zdjęcie 1

Spring Announcement - HueForge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Other Art & Designs
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

This HueForge-style bas-relief was created using only 3 colors.

🔹 Colors

  • Red and Black: No special requirements.

  • White: 💡 The result shown in the photos was achieved using Sunlu PLA White (standard PLA).
    Highly opaque or matte white PLAs may produce a bas-relief with too much white and less defined shading.
    For best results, use a white PLA with slight translucency.

🔹 Model Dimensions

  • 180 × 130 mm – approx. 30 g

🔹 Included versions

  • (For MMU) = 3MF file for PrusaSlicer + MMU (automatic color changes) or multi-tool printers.
    You only need to load the MMU with the 3 filaments (Black, White, Red).

  • (NO MMU) = 3MF file for PrusaSlicer without MMU (manual color change pauses already set)
    - It starts with Black
    - Layer 8 (0.76 mm) - White
    - Layer 22 (1.90 mm) - Red
    - Layer 25 (2.14 mm) - White

  • (STL) = Universal STL compatible with other slicers and printers.

             You will need to use the following settings:
             - Layer height = 0.08mm
             - First layer height = 0.20mm
             - Infill = 100%

              In the slicer select the model, then right-click → Height Range Modifier to set:
             - 1.80 – 1.90 mm → Layer height 0.10 mm

               Add the Color changes or Pauses in the slicer preview:
             - It starts with Black
             - Layer 8 (0.76 mm) - White
             - Layer 22 (1.90 mm) - Red
             - Layer 25 (2.14 mm) - White

🔹 Printing Notes

  • Printability: the model can be easily printed on any 3D printer with a 0.4 mm nozzle, without supports and without special precautions.

  • Do not simplify the model: reducing the level of detail may lead to unpredictable results.

  • Slicer processing time: a few minutes, due to the high level of detail.

  • The “floating regions” warning can be ignored.

  • The model can be scaled in X and Y, but not in Z. It can also be split into multiple parts to create a bas-relief larger than the print bed.
     

 Click on this link to Support for HueForge panels:
https://www.printables.com/model/1716227-support-for-hueforge-panels-small-frames-plates

Click this link to view my full collection of HueForge-style bas-reliefs:
https://www.printables.com/@AlexFreeNet_4570629/collections/3420844

Questions or doubts? Send me a message.

Tagi

decorationgardenmountainsunflowerscolorsaprilmarchmayholidaynaturenewsbloomseasonpetalsrebirth