P
Printablesaustin simon
Fortnite new medallions chapter 5 season 2
This is the new chapter 5 season two medallions
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
- Pobrania
- 682
- Polubienia
- 31
- Ocena
- 0
Wyniki wyszukiwania: season
370 modeli
P
PrintablesPolygonBronson
Seasoning/Gravy Packet Holder Lite
I finally got tired of my seasoning packets going all over the place in my cupboard so I decided to print a holder for them. All of the existing designs I could find online were either total overkill to hold some packets or used way too…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
- Pobrania
- 481
- Polubienia
- 55
- Ocena
- 5
P
PrintablesLexie_Eclectic
Season Changing Photo Frame
I share how I made the frame and the magnets in this video: I cut the candy cane models into white and red sections so that I could print the white and red pieces separately and then glued them together with super glue. This is tricky so…
Wydruk około 1,66 €–2,02 € nettoWstępna wycena jednego wariantu
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesZac Smith
LEAF1 F1 In Schools 2024 Season Upload
Hi Everyone! We are LEAF1 - an F1 in schools team who were crowned 2024 UK Champions, and competed at the world finals in Saudi Arabia, where we placed 5th. This account is run by the lead engineer - Zac. It's part of our open-source…
- Pobrania
- 2445
- Polubienia
- 15
- Ocena
- 0
P
Printablestshelley
Marvel United (Season 1 & 2) Miniatures Box Insert
Updated 05/18/2022 Added new 79x1 (in three fits) to support season 2 minatures Added new labels for Season 2 Updated Instructions for Season 2 Updated 03/28/2022 Added new medium fit files (see “Optimizing Fit” section below) Updated…
- Pobrania
- 2315
- Polubienia
- 215
- Ocena
- 5
P
PrintablesD3DCreative
Squid Game Doll - Younghee (Red light - Green light) Squid Game Season 2 / Squid Game Season 3 (UPDATED added pre-coloured .3mf files)
UPDATE: For your convenience I have now added pre-coloured .3mf files at a whopping 520% scale, you'll need to add supports yourself and you can down-scale in slicer if you wish. 😁 ( I have not included the Base ). This was done for the…
- Pobrania
- 1151
- Polubienia
- 136
- Ocena
- 5
P
PrintablesUpdesky
Circuit de Spa Francorchamps, Stavelot, Belgium, Formula 1 Race Track 2022 Season
Circuit de Spa Francorchamps, Stavelot, Belgium, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
- Pobrania
- 1101
- Polubienia
- 122
- Ocena
- 4,83
P
PrintablesRenba
Modular Seasoning Condiment Modular Packet Caddy Organizer
A simple Seasoning Condiment organizer Inside space : 135mm witdh x 50mm length (x 70mm height) (5.31" x 1.97" x 2.75") No supports needed ! For exemple each caddy can hold 4 to 6 bags: Knorr 28 to 36 gr 129mm(5.08") width Maggi 26 to 40…
- Pobrania
- 1082
- Polubienia
- 425
- Ocena
- 5
P
PrintablesUpdesky
Circuit de Monaco, Formula 1 Race Track 2022 Season
Circuit de Monaco, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color fillament.…
- Pobrania
- 879
- Polubienia
- 107
- Ocena
- 5
P
Printablesjaztermareal
Cut+keyed ver Andor / Mandalorian season 3 version Star Wars DC15S carbine blaster for cosplay
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
- Pobrania
- 878
- Polubienia
- 254
- Ocena
- 4,8
P
PrintablesLayerLux3D
Rick and Morty Season 1 Episode 1
This is a homage to my favorit scenes from Rick and Morty Season 1 Episode 1. More to come... https://cults3d.com/en/users/OneIdMONstr/creations Print in 50% for Elegoo Mars. Category: Sculptures
- Pobrania
- 777
- Polubienia
- 85
- Ocena
- 5
P
PrintablesSLIMPRINT
Minimalist Reindeer, Seasonal Christmas Decoration
A minimalist yet cute reindeer ornament, which is inspired by the class Band Saw Reindeer by Nick Engler. Because I didn't have a band saw, I designed a 3D printable version similar to the original, but with some slight adjustments for…
- Pobrania
- 751
- Polubienia
- 193
- Ocena
- 5
P
Printablestshelley
Marvel United Card Trays (Season 1 and 2)
Vertical card storage for character and villain cards for Season 1 and Season 2. Note: If you want a solution for storing your minatures see my other model: Marvel United Miniature Storage Card sleeves These trays have a 67.5mm wide card…
- Pobrania
- 721
- Polubienia
- 77
- Ocena
- 5
P
Printables3D Danukie
A perfect and easy pumpkin to start the Halloween season!
A perfect and easy pumpkin to start the Halloween season! !! NOT for use with open flame, fire, or candles !! Only use with battery operated lights
- Pobrania
- 679
- Polubienia
- 163
- Ocena
- 0
P
PrintablesLEAF1 @ Langton
LEAF1 F1 in schools 2022/2023 Season Upload
WORK IN PROGRESS - MORE DETAILS TO COME IN THE FOLLOWING DAYS Hi! We are LEAF1, an F1 in schools team from Canterbury, England, with a focus on remaining both Sustainable, and Open Source as we compete within the competition. F1 in…
- Pobrania
- 655
- Polubienia
- 17
- Ocena
- 0
P
PrintablesThomas V
Arrow (DC) Season 5 Arrow head
I designed this arrow head loosely after the arrow head seen in the intro of Arrow season 5. It fits a standard 7mm shaft and can be printed upright. Print instructions Category: Costume Print Settings Printer Brand: Creality Printer:…
- Pobrania
- 524
- Polubienia
- 51
- Ocena
- 5
P
PrintablesOrion
Trout season
Wall art decoration with motif of trout. Nozzle 0.4 Layer 0.2 Warning - fragile
- Pobrania
- 509
- Polubienia
- 84
- Ocena
- 4
P
PrintablesDahliamoth
Gravy/Taco seasoning packet organizer
Wife had all these packets in the pantry in a ripped open box from tea packets, I was bored and the printers were idle. So this happened. Each divider inside can hold 2-3 of these packets. I printed it on a lower quality setting bc it…
- Pobrania
- 501
- Polubienia
- 65
- Ocena
- 5
P
Printablesgameyspirits
OLD - REMIX Cthulhu Death May Die - Retail Boxes Inserts SLEEVED CARDS (holds Season 1, 2, Goat, Yog)
######################## UPDATE 2025-02-03 If you have all 4 seasons, the unknowable box, and all the elder gods, check out my new insert. https://www.printables.com/model/1177300-cthulhu-death-may-die-retail-boxes-inserts-sleeved…
- Pobrania
- 495
- Polubienia
- 82
- Ocena
- 5
P
PrintablesAmbasada3d
Max Verstappen - F1 Driver (Red Bull Racing) Leaderboard Keychain - Season 2025
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Max Verstappen from Red Bull Racing . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a…
- Pobrania
- 486
- Polubienia
- 64
- Ocena
- 5
P
PrintablesJoe
Elmer Fudd - It's wabbit hunting season
Now where's that wascally wabbit!? Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
- Pobrania
- 460
- Polubienia
- 57
- Ocena
- 5
P
PrintablesGum Gamble
Fortnite Medallions Season 3 Chapter 5
Season 3 Chapter 5 Medallions. Created from SVG. I've only printed at max speed to test the designs but some improvements can be made for a better top layer quality.
- Pobrania
- 459
- Polubienia
- 24
- Ocena
- 5
P
PrintablesMaquetasCNC
Inserto Growing Season
Inserto oficial para el juego de mesa Growing Season (creado por Eric Rodriguez https://twitter.com/EricRod_LYV ) Inserto diseñado para albergar todos los componentes de Growing Season ordenados y seguros. Con espacio suficiente para…
- Pobrania
- 438
- Polubienia
- 18
- Ocena
- 5
P
PrintablesModel Magic
Game of Thrones - Drogon - Season 8 2019
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Pobrania
- 429
- Polubienia
- 43
- Ocena
- 0
P
Printablesjaztermareal
Andor / Mandalorian season 3 version Star Wars DC15S carbine blaster for 1:6 and 1:12 scale figures and cosplay
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
- Pobrania
- 426
- Polubienia
- 132
- Ocena
- 5
P
Printablesgameyspirits
Cthulhu Death May Die - Board Game Boxes Inserts SLEEVED CARDS (holds Season 1, 2, 3, 4, Unknowable, Goat, Yog, Ithaqua, Animal Allies)
This insert will combine all 4 seasons, the unknowable box, Black Goat, Yog, Ithaqua, and animal allies all into 4 boxes. Without getting rid of the episode boxes, this is what I came up with. This insert will get rid of all your elder…
- Pobrania
- 423
- Polubienia
- 66
- Ocena
- 0
P
PrintablesUpdesky
Autodromo Nazionale di Monza, Italy, Formula 1 Race Track 2022 Season
Autodromo Nazionale di Monza Circuit, Monza, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
- Pobrania
- 416
- Polubienia
- 39
- Ocena
- 5
P
Printables3DCraft
Eddie Munson Guitar Scene Diorama – Stranger Things Season 4
This diorama recreates the iconic scene from Stranger Things (Season 4) where Eddie Munson performs an epic guitar solo on top of the trailer in the Upside Down . Standing on the roof of the RV, Eddie plays his electric guitar to distract…
- Pobrania
- 414
- Polubienia
- 52
- Ocena
- 0
P
Printablescubiclelord
Marvel United (Season 3) Miniatures Box Insert
This is remix of TShelley's amazing Marvel United Insert system. This covers how I fit Season 3 into the Kickstarter extras box. One issue is that Crimson Dynamo's base is 35mm instead of 30mm like most of the other minis. I modified the…
- Pobrania
- 388
- Polubienia
- 28
- Ocena
- 5
P
PrintablesConnor Sigman
Lattice Pumpkin - Seasonal Decor
A pumpkin featuring a lattice design.
- Pobrania
- 379
- Polubienia
- 75
- Ocena
- 5
P
Printables피르 Mr
Squid Game Season 2 / Game 2-3
I haven't done any print tests. I'll have to make tolerances for assembly. You can use it after modifying it, or I'll modify it and upload it as soon as possible.
- Pobrania
- 375
- Polubienia
- 17
- Ocena
- 0
P
PrintablesPengLord
Marvel United (Season 1 & 2) Miniatures Box Insert - Large and XLarge mini holders
I remixed the original design to hold Mojo (XLarge), Onslaught (Large), and Brood Queen (Large) in the Infinity Gauntlet box. It seems there is a lot of variance in the bases for Marvel united (I used the “Loose” trays and still up-sized…
- Pobrania
- 369
- Polubienia
- 36
- Ocena
- 5
P
PrintablesUpdesky
Silverstone Circuit, United Kingdom, Formula 1 Race Track 2022 Season
Silverstone Circuit, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
- Pobrania
- 342
- Polubienia
- 24
- Ocena
- 5
P
PrintablesPulp
Final Girl - Season 1 & 2 - Board Game Inserts
The second printing of Final Girl came with updated storage trays. As they still do not offer secure storage for the components, I updated my original design to include enough space for sleeved cards (Sleeve Kings) and slots for the…
- Pobrania
- 342
- Polubienia
- 63
- Ocena
- 5
P
PrintablesAmbasada3d
Charles Leclerc - F1 Driver (Ferrari) Leaderboard Keychain - Season 2025
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Charles Leclerc from Ferrari . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible…
- Pobrania
- 337
- Polubienia
- 48
- Ocena
- 5
P
PrintablesUpdesky
Red Bull Ring, Spielberg, Austria, Formula 1 Race Track 2022 Season
Red Bull Ring Circuit, Spielberg, Austria, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
- Pobrania
- 326
- Polubienia
- 23
- Ocena
- 5
P
Printableswheelrightmd
Marvel United (Season 1 & 2) Miniatures Box Insert - Sentinel Holders, Card and Token Trays
This Insert is an extension of tshelley’s excellent Marvel United Miniatures Box Insert and Penglord’s remix of that insert. I printed tshelley’s design almost as is (I printed the same token tray twice instead of one of each). I printed…
- Pobrania
- 326
- Polubienia
- 20
- Ocena
- 0
P
Printablesstefanmader1984
Stranger Things Vecna from Season 5
Stranger Things Vecna from Season 5 To make him stand better,heat his legs with a heatgun and push him into a good position
- Pobrania
- 310
- Polubienia
- 21
- Ocena
- 0
P
PrintablesUpdesky
Suzuka International Racing Course, Japan, Formula 1 Race Track 2022 Season
Suzuka International Racing Course, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
- Pobrania
- 296
- Polubienia
- 25
- Ocena
- 5
P
PrintablesAmbasada3d
Lewis Hamilton - F1 Driver (Ferrari) Leaderboard Keychain - Season 2025
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Lewis Hamilton from Ferrari . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible item…
- Pobrania
- 294
- Polubienia
- 24
- Ocena
- 0
P
PrintablesMikhail Babarinow
Four Seasons
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
- Pobrania
- 293
- Polubienia
- 130
- Ocena
- 4
P
PrintablesRyan Muraglia
Halloween 3 Season of The Witch Skull Mask With Silver Shamrock Tag
Halloween 3 Season of The Witch Skull Mask With Silver Shamrock Tag
- Pobrania
- 292
- Polubienia
- 66
- Ocena
- 0
P
PrintablesUpdesky
Circuit of the Americas, Austin, United States, Formula 1 Race Track 2022 Season
Circuit of the Americas, Austin, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
- Pobrania
- 281
- Polubienia
- 22
- Ocena
- 5
P
PrintablesModel Magic
Game of Thrones - Drogon Breathing Fire - Season 8 2019
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Pobrania
- 279
- Polubienia
- 37
- Ocena
- 0
P
PrintablesPengLord
Marvel United Season 3 - One piece trays and modified pet cages for Multiverse
I still need large mini storage (waiting for Witching Hour). Includes: Trays for Marvel United Season 3 - Multiverse Larger name plate for Crimson Dynamo Updated pet cages (4 standard pet cages and 1 Redwing cage as pictured) I used the…
- Pobrania
- 277
- Polubienia
- 11
- Ocena
- 0
P
PrintablesAmbasada3d
Lando Norris - F1 Driver (McLaren) Leaderboard Keychain - Season 2025
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Lando Norris from McLaren . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible item…
- Pobrania
- 276
- Polubienia
- 28
- Ocena
- 0
P
Printablesfgpikus
Medieval Castle - Seasons (5-color remix)
Multi-color 3MF files for the Medieval Castle, painted in PrusaSlicer. The Winter Castle is covered in snow, and the Summer Castle has grassy slopes. The five colors are Castle Walls (stone) Castle Roofs (red) Trees (wood) Rocks (black)…
- Pobrania
- 273
- Polubienia
- 38
- Ocena
- 0
P
PrintablesUpdesky
Circuit de Barcelona Catalunya, Spain, Formula 1 Race Track 2022 Season
Circuit de Barcelona Catalunya, Spain, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
- Pobrania
- 272
- Polubienia
- 23
- Ocena
- 5
P
PrintablesUpdesky
Circuit Zandvoort, the Netherlands, Formula 1 Race Track 2022 Season
Circuit Zandvoort, the Netherlands, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
- Pobrania
- 260
- Polubienia
- 25
- Ocena
- 5
P
PrintablesStarBug_Props
The Mandalorian Season 3 Creed Anything goes Shoulder bell and bicep pack
So having looked over cap that it appears that the creed mandos have scavenged whatever they could find... I saw mudtrooper shoulder bells and biceps, shoretrooper bells and some post imperial bells Shoretrooper Shoulder bells and…
- Pobrania
- 255
- Polubienia
- 41
- Ocena
- 5
P
PrintablesUpdesky
Interlagos (Autodromo Jose Carlos Pace), Sao Paulo, Brazil, Formula 1 Race Track 2022 Season
Interlagos (Autodromo Jose Carlos Pace), Sao Paulo, Brazil, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate…
- Pobrania
- 248
- Polubienia
- 17
- Ocena
- 5
P
PrintablesUpdesky
Autodromo Enzo e Dino Ferrari, Imola, Italy, Formula 1 Race Track 2022 Season
Autodromo Enzo e Dino Ferrari Circuit, Imola, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
- Pobrania
- 246
- Polubienia
- 22
- Ocena
- 5
P
Printablesmaot1985
Retroid Pocket 3+ Griff von SeasonedBeef (Thingiverse)
Das Modell ist von Thingiverse, leider nicht bei Printables zu finden. Es passt aber perfekt an den Retroid Pocket 3+. Gedruckt habe ich meinen Griff in PLA mit einer Skalierung von 99,5% und nichts wackelt. Zur Stabilisierung habe ich es…
- Pobrania
- 237
- Polubienia
- 24
- Ocena
- 3,5
P
PrintablesSkia_MKX
Seasonal Lantern with Interchangeable Panels
Introducing my Seasonal Lantern with Interchangeable Panels. I first started this project as a lantern for Halloween 2022, and quickly realized it could be so much more, I will be updating this model regularly with new features and…
- Pobrania
- 234
- Polubienia
- 79
- Ocena
- 5
P
PrintablesAus_Glenn
Stranger Things Season 3 Prop "Radioactive Goop"
I designed and drew up in Fusion360 a prop for Cosplay. Its the "goop" that is found by Erica Robyn and Steve. I used a "Voss" plastic water bottle as the clear bottle. It is 63mm so the top and bottom are designed to fit that. The base…
- Pobrania
- 233
- Polubienia
- 58
- Ocena
- 0
P
PrintablesUpdesky
Jeddah Corniche Circuit, Saudi Arabia, Formula 1 Race Track 2022 Season
Jeddah Street Circuit, Jeddah, Saudi Arabia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
- Pobrania
- 228
- Polubienia
- 14
- Ocena
- 0
P
Printablesironfinch
Everdell Season Tracker
Keeps track of which season a player is in. Can be especially useful when playing against Nightweave in Mistwood expansion (replaces the cardboard discs).
- Pobrania
- 208
- Polubienia
- 37
- Ocena
- 5
P
PrintablesUpdesky
Bahrain International Circuit Formula 1 Race Track 2022 Season
Bahrain International Circuit, Bahrain, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
- Pobrania
- 204
- Polubienia
- 17
- Ocena
- 5
P
PrintablesThe Maker Chemists
Mickey dressed for Christmas season
Mickey's silhouette dressed for Christmas decoration. Easy and quick to print in one piece. Perfect for the little ones' preferences. Printing settings: Nozzle diameter: 0.4 mm Layer height: 0.25 mm Perimeters: 3 Top and bottom solid…
- Pobrania
- 204
- Polubienia
- 28
- Ocena
- 5
P
PrintablesLuis s
Attack On Titan Thunder Spear Cosplay Props Levi/Mikasa Costume Season 4 Odm Gear
The files leverage shipping tubes in order to create the main body of the thunders pears this allows for a very light weight but structurally sturdy prop. I have a video tutorial that explains how to assemble the thunder spears. The video…
- Pobrania
- 201
- Polubienia
- 86
- Ocena
- 0
P
PrintablesUpdesky
Hungaroring, Hungary, Formula 1 Race Track 2022 Season
Hungaroring, Hungary, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
- Pobrania
- 194
- Polubienia
- 20
- Ocena
- 5
P
PrintablesAmbasada3d
Andrea Kimi Antonelli - F1 Driver (Mercedes) Leaderboard Keychain - Season 2025
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Andrea Kimi Antonelli from Mercedes . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a…
- Pobrania
- 192
- Polubienia
- 21
- Ocena
- 5
P
PrintablesUpdesky
Marina Bay Circuit, Singapore, Formula 1 Race Track 2022 Season
Marina Bay Circuit, Singapore, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
- Pobrania
- 192
- Polubienia
- 14
- Ocena
- 5
P
PrintablesRBlackhart
Seasonal Tea Light Stand
This is a simple seasonal tealight candle holder that I designed as part of a "CAD for 3D Printing" workshop for the NetApp YWIT 2020 event. You can see the video of the design session here: https://ywit.io/workshops/cad_for_3d_printing…
- Pobrania
- 189
- Polubienia
- 62
- Ocena
- 5
P
PrintablesUpdesky
Autodromo Hermanos Rodriguez, Mexico, Formula 1 Race Track 2022 Season
Autodromo Hermanos Rodriguez, Mexico, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
- Pobrania
- 185
- Polubienia
- 10
- Ocena
- 0
P
PrintablesEvilResident
Bonsai pot 4 season
Bonsai pot with dish and feet. Japanese seasons inscription on 4 sides (Haru, Natsu, Aki, Fuyu). Dish and feet are separate to print without support (glue them in the holes)(Print 4 foot). No support needed on any of the parts.
- Pobrania
- 184
- Polubienia
- 27
- Ocena
- 5
P
PrintablesUpdesky
Yas Marina Circuit, Abu Dhabi, United Arab Emirates, Formula 1 Race Track 2022 Season
Yas Marina Circuit, Abu Dhabi, United Arab Emirates, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
- Pobrania
- 179
- Polubienia
- 9
- Ocena
- 5
P
PrintablesAmbasada3d
Oscar Piastri - F1 Driver (McLaren) Leaderboard Keychain - Season 2025
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Oscar Piastri from McLaren . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible item…
- Pobrania
- 176
- Polubienia
- 22
- Ocena
- 0
P
PrintablesUpdesky
Hard Rock Stadium Circuit, Miami, USA, Formula 1 Race Track 2022 Season
Hard Rock Stadium Circuit, Miami, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
- Pobrania
- 173
- Polubienia
- 14
- Ocena
- 5
P
PrintablesSkyF0V
12VHPWR Cable Combs for Seasonic PSUs
Was trying to find a cable comb for the 12VHPWR cable on my Seasonic power supply but didn't find anything. So, I made my own. This is sized for the default PSU cables. This is best suited for graphics cards that have the sideband pins on…
- Pobrania
- 171
- Polubienia
- 10
- Ocena
- 0
P
PrintablesKaren Chau Designs
Cute fall pumpkins with vine | Autumn seasonal decor | Thanksgiving magnets | Pumpkin Spice Latte "PSL"
Add any size magnet you want to the back and stick it everywhere! Magnets Glue Magnets with adhesive As an Amazon Associate I earn from qualifying purchases. Shopping through my links does NOT cost extra to you, but I may earn commission…
- Pobrania
- 171
- Polubienia
- 41
- Ocena
- 5
P
PrintablesRyan Muraglia
Halloween 3 Season Of The Witch Pumpkin Mask With Silver Shamrock Tag
Halloween 3 Season Of The Witch Pumpkin Mask With Silver Shamrock Tag
- Pobrania
- 169
- Polubienia
- 32
- Ocena
- 0
P
PrintablesCeptoRider
Good Season's Cruet Lid
Printed with Filaments.ca TRUE Food Safe PETG - Natural (Biocompatible) Revised 25-10-2023: Updated with a slightly larger diameter and snap-lid profile. Original design showed stress breaks after a few dishwashings. Also includes a…
- Pobrania
- 169
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFrikarte3D
Snowflake Mechanically Locking Box Season of Giving
Snowflake Mechanical Box is a 3D printable model that lets you create your own festive and fun box for the holiday season. It is a remix of the Mechanically Locking Container by JamesThePrinter , but with a snowflake theme. The box has a…
- Pobrania
- 167
- Polubienia
- 28
- Ocena
- 5
P
PrintablesICosplayInsanity
Trevor Belmont's Cross Boomerang Weapon - Castlevania Season 4 - FDM
A spinning version of the cross/boomerang sub-weapon in the Netflix Castlevania show. The blades rotate, emulating the impossible movement seen in the show (no really the secondary set of blades appears out of thin air when all 4 blades…
- Pobrania
- 164
- Polubienia
- 69
- Ocena
- 0
P
Printables3DBrooklyn
Crown - Vikings 3D Prophecy - Season 4 Episode 20 - The Reckoning
When we got our hands on these items you noticed right away the weight and metal finish. So the challenge for us was to replicate that intricacy. We sliced the items in multiple pieces, 3D printed on a Makerbot Replicator 2, glued…
- Pobrania
- 163
- Polubienia
- 34
- Ocena
- 0
P
Printablesbatman
HueForge Seasonal Decorations: Christmas
Description AI generated image of a Christmas scene processed in HueForge (for background on how to setup your slicer, see this video ). ✨ For more in this series, see my collection HueForge Seasonal Decorations Print Settings Print at…
- Pobrania
- 162
- Polubienia
- 40
- Ocena
- 5
P
Printablesaustin simon
Fortnite new medallions chapter 5 season 2 keychains
So you have to pop out the medallions out of the print then; you have to glue the blank medallions I have created. like always follow i will follow you back ,and enjoy!
- Pobrania
- 160
- Polubienia
- 32
- Ocena
- 0
P
PrintablesUpdesky
Baku City Circuit, Azerbaijan, Formula 1 Race Track 2022 Season
Baku City Circuit, Azerbaijan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
- Pobrania
- 158
- Polubienia
- 11
- Ocena
- 5
P
PrintablesAdam Hazda
Spooky All-Season Modular Lantern – Interchangeable Panels
Bring cozy ambiance to your home all year round with this fully customizable 3D-printed lantern! Designed around interchangeable side panels, this lantern easily adapts to any season or occasion—whether it’s Halloween, Christmas, Easter,…
- Pobrania
- 158
- Polubienia
- 76
- Ocena
- 4
P
PrintablesUpdesky
Circuit Paul Ricard, Le Castellet, France, Formula 1 Race Track 2022 Season
Circuit Paul Ricard, Le Castellet, France, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
- Pobrania
- 156
- Polubienia
- 13
- Ocena
- 4,5
P
PrintablesJoe's O's
NBA In-Season Tournament Cup
I modeled the NBA Cup in 3D
- Pobrania
- 155
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTwirlygrlandMom
Witch-Tac-Toe - Three in a Row - Spooky Season Tic Tac Toe Game - Halloween Decor
Fight over who gets to be the witch and who gets to be the fire! Print 5x fire and 5x witch. One board. We wanted to make a spooky halloween tic tac toe set to play in our free time. Utilize filament changes to make the fire features…
- Pobrania
- 153
- Polubienia
- 95
- Ocena
- 5
P
Printablescinnabar
Inis + Seasons of Inis Insert for Seasons Box
Fair warning: I made this a few years ago and had actually forgotten I had done so until I pulled Inis off the shelf recently. There's some things I might change or tighten up if I were doing it again but I think it's still like 90% of…
- Pobrania
- 153
- Polubienia
- 21
- Ocena
- 5
P
PrintablesUpdesky
Las Vegas Street Circuit, USA, Formula 1 Race Track 2023 Season
Las Vegas Street Circuit, USA, planned for 2023 season, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
- Pobrania
- 150
- Polubienia
- 13
- Ocena
- 0
P
PrintablesPulp
Final Girl - Season 3 - Board Game Inserts
These are the inserts for Season 3 of Final Girl , the board game series. As with the other boxes (found here & here ), you can use the original lids to close the boxes. Update : It seems as if the 3rd print run came with slightly smaller…
- Pobrania
- 146
- Polubienia
- 26
- Ocena
- 5
P
PrintablesAstuni
Seasons Boardgame Crystal Track Helper
Simple press fit cover for Seasons Crystals track. Helps avoiding disaters if the board gets bumped while playing. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Filament: Prusament…
- Pobrania
- 140
- Polubienia
- 11
- Ocena
- 5
P
PrintablesKCKrogoth
Gravy or Seasoning Packet Holder
Simple container to hold standard seasoning packets. Printed Creality Hyper White PLA. Approx 10 ½" deep.
- Pobrania
- 138
- Polubienia
- 14
- Ocena
- 0
P
PrintablesSteffenBeck
Zombicide Season1 box organizer - token & card holder
Organizers for tokens & cards found in the game Zombicide Season 1. Replaces the box spacers in the core game. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Filament: unknown PLA black How I Designed This…
- Pobrania
- 134
- Polubienia
- 23
- Ocena
- 0
P
PrintablesStarBug_Props
Damson Mando (Season 3 The Mandalorian)
Another variant. Same as the others 100% is 205mm inside ear to ear measurement (same as the EFX helmet) Category: 3D Printing
- Pobrania
- 133
- Polubienia
- 32
- Ocena
- 5
P
PrintablesMikePatterson
Seasoning Packet Organizer
Stack-able Boxes used to hold seasoning packets. They measure 4.75"w X 5.75" d X 6"h
- Pobrania
- 130
- Polubienia
- 22
- Ocena
- 0
P
Printables3DEEFLIX
Pumpkins for Halloween Season!
My take on Jack-O'-Lanterns for this Halloween season. Do not miss out on awesome exclusives by subscribing to my patreon! Trust me I have a bunch of great ideas lined up for Halloween and Christmas! And as a subscriber you get a…
- Pobrania
- 128
- Polubienia
- 37
- Ocena
- 5
P
Printables3DBrooklyn
Viking Horn - Vikings 3D Prophecy - Season 4 Episode 19 - On the Eve
The Viking horn was very easy to 3D scan but the technology was only able to capture the outside surface of the horn. Once we were able to hollow out the horn, we 3d printed and assembled it. Interesting fact about the horns, they were…
- Pobrania
- 125
- Polubienia
- 21
- Ocena
- 0
P
PrintablesSpantzz 2314
All chapter 5 season 4 fortnite Medallions
it's a medallions in order to create these I had to use a lot of different shapes on Tinkercad in order to make these precise angles it took me a while but I finally got it
- Pobrania
- 119
- Polubienia
- 10
- Ocena
- 0
P
PrintablesCaseStudyno8
Ezra Bridger's Lightsaber (Rebels seasons 1 & 2)
Ezra's first lightsaber! I had done his second, so of course I had to do the original in all of its hybrid saber/blaster glory! Personally I printed the guard with supports generated in Cura. All of the STLs are in the orientation I…
- Pobrania
- 119
- Polubienia
- 41
- Ocena
- 0
P
PrintablesAmbasada3d
George Russell - F1 Driver (Mercedes) Leaderboard Keychain - Season 2025
Show your support for your favorite Formula 1 driver with this custom keychain design featuring George Russell from Mercedes . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible…
- Pobrania
- 118
- Polubienia
- 17
- Ocena
- 5
P
PrintablesAmbasada3d
Fernando Alonso - F1 Driver (Aston Martin) Leaderboard Keychain - Season 2025
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Fernando Alonso from Aston Martin . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a…
- Pobrania
- 118
- Polubienia
- 13
- Ocena
- 0
P
PrintablesJRT3D
It's A Weeder - Bird House - From Stranger Things, Season 4
It's A Weeder - Bird House - From Stranger Things; Season 4, is introduced to us and here - now we can 3D Print our very own. Use supports on the roof for the mounting nut. You'll use a M5x30 screw and a M5 Nut to attached the Chimney to…
- Pobrania
- 117
- Polubienia
- 48
- Ocena
- 5
P
PrintablesMichalcik
Self-watering planter with seasons - vase mode
Small self-watering planter with seasons icons designed to be printed in vase mode to save time and material. Planter is in one piece with maximum overhangs 45°. It is 90mm height and 80mm wide. Print settings: vase mode 0.8mm extrusion…
- Pobrania
- 117
- Polubienia
- 32
- Ocena
- 0