Bilresa 2 button with small light switch holder cover.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another BILRESA 2 button holder combo with small light switch plate.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
I didn't select this model as a remix as I wasn't sure if I could add multiple creators so I instead added them below.
I needed a holder for the BILRESA 2 button switch so I came up with this mash-up.
I added an indent at the back of the plate so you can add the metal plate. I also cut a rectangular hole so that the magnet has less restriction to attract the plate (you can also push on the metal plate to put a slight bend to it so that the magnet contacts the metal plate. The walls have been raised, and depending on how well you've tuned your printer, your switch should snap into the holder and be held in place by lip of the holder top.
ATTN: As always be safe and print with electrical approved filaments.
Credit for the original models go to the following creators.
This model is a remix of a couple of designs from:
@TheoFieber_1103940's - Wall mount
@blunt's Single Light Switch Cover
I used the following to cover the light switch: