Flanged Spacer / buhing for 20mm Bearing and M12 Bolt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strong flanged spacer for 20mm bearing and M12 bolt. Optimised for high-strength PETG print.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Open Community License v1
A universal functional flanged spacer (bushing) designed to fit tightly into a bearing with a 20mm inner diameter, allowing an M12 bolt to pass through. The 25mm flange acts as a stop/support against the inner ring of the bearing. It features a chamfer on the bottom edge for easier press-fitting.
The model is designed with tolerances tight enough for a secure press-fit into the bearing (best assembled using a vise).
Recommended Print Settings:
Material: PETG (for strength and durability)
Nozzle: 0.4 mm or 0.6 mm
Layer Height: 0.20 mm or 0.30 mm (Structural profile)
Perimeters: 4 (for 0.6mm nozzle) or 6 (for 0.4mm nozzle) – crucial for strength!
Infill: 40% Gyroid
Orientation: Print with the wider 25mm flange facing down on the build plate, no supports needed.
