1 / 2
Flanged Spacer / buhing for 20mm Bearing and M12 Bolt — image 1
1 / 2

Flanged Spacer / buhing for 20mm Bearing and M12 Bolt

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Strong flanged spacer for 20mm bearing and M12 bolt. Optimised for high-strength PETG print.

Rating
0 / 5
Likes
2
Downloads
5
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

License
Open Community License v1

A universal functional flanged spacer (bushing) designed to fit tightly into a bearing with a 20mm inner diameter, allowing an M12 bolt to pass through. The 25mm flange acts as a stop/support against the inner ring of the bearing. It features a chamfer on the bottom edge for easier press-fitting.

The model is designed with tolerances tight enough for a secure press-fit into the bearing (best assembled using a vise).

Recommended Print Settings:

Material: PETG (for strength and durability)

Nozzle: 0.4 mm or 0.6 mm

Layer Height: 0.20 mm or 0.30 mm (Structural profile)

Perimeters: 4 (for 0.6mm nozzle) or 6 (for 0.4mm nozzle) – crucial for strength!

Infill: 40% Gyroid

Orientation: Print with the wider 25mm flange facing down on the build plate, no supports needed.

Tags