Opel Zafira A Getränkehalter-Adapter / Cup Holder Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Opel Zafira A adapter for slim Red Bull-style energy cans. Helps smaller cans sit more securely.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this adapter for a friend’s Opel Zafira A.
It is designed for slim energy drink cans, like Red Bull-style cans. The original cup holder is a bit too wide for these, so the cans sit loose and can wobble around.
The adapter reduces the diameter and makes the can sit much better.
It is a simple part, but it fits very well and does what it should.
PETG is recommended for use in a car. PLA may work, but it can deform in summer heat.
## Print settings
I printed it on my Prusa Core One+ in PETG with a 0.4 mm nozzle.
- Material: PETG recommended
- Layer height: 0.20 mm
- Infill: 15–25 %
- Perimeters: 3
- Supports: not needed
- Brim: not needed
