FrSky X20S AliExpress case inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
gap closing inserts for a transmitter case
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
I decided to upgrade the case for my FrSky X20S and ordered one from AliExpress - https://www.aliexpress.com/item/4000677757547.html (size: 330x235x170mm). The original insert fits right in but leaves a 3cm gap on the side so i designed few different type of inserts in order to close that gap or make another compartment for gear.
Case Spacer Left Side + Case Spacer Right Side → simple gap closing inserts from both sides of the original insert
Case Insert cut sponge v1 → if you decide to cut the original insert on the left side, where the the neck strap located and create a big compartment on the left side of the case
Case Spacer single insert as compartment v1 → if you don't want to cut anything but a small additional compartment on the left side of the case
Case Spacer v3 -< Single insert from the left side of the original insert with no compartment