1 / 2
MiniSB Hotend Mount for TZ V6 2.0 Hotend adjusted for use with V6 nozzles — zdjęcie 1
1 / 2

MiniSB Hotend Mount for TZ V6 2.0 Hotend adjusted for use with V6 nozzles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Geometry has been shortened up to accommodate the use of V6 nozzles which are slightly longer than the TZ nozzles

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
90
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

MiniSB Hotend Mount for TZ V6 2.0 Hotend adjusted for use with V6 nozzles. The V6 Nozzles are slightly longer than the normal TZ nozzles which means that the part cooling ends up blowing on the nozzle instead of the hot filament. This is based off of the dragon mount from the Voron 0 github, but shortened up to account for V6 nozzles being slightly longer. I reccomend you print with voron settings (4 perimiters, 4 top, 4 bottom, and 40% infill)

Tagi