Pressure Washer Nozzle Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounted hanger for the quick connect pressure washer nozzles, plus the lances and also a hanger for a spray bottle
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This will hold the 0,15,25, 40 degree, soap and rinse nozzles that are quick connector types. I also added space for a drain cleaning nozzle.
Each of the places are labelled so you know which nozzle is which. If I had a MMU then I would have added color to the text's to match the nozzle colors as I think they are standard colors across the manufacturers.
The openings that are labelled in the model are 10.5mm wide for the quick connect nozzles.
The very end one is 14mm wide to hold the lances with quick connects on them and that connects to my Nilfisk pressure washer. This pipe is larger then the others so had to widen the last one.
The other two not labelled are 11mm wide to hold the lances.
The hanger underneath holds a soap spray bottle for the pressure washer.
Slicer Settings
Material : PLA+
Layer Height : 0.2mm
No support is required if you print it on its back.