Core ONE SlimStack Risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low-profile stackable feet for Core ONE+ & L. Raises just 7.5mm with sheet storage underneath. Only 20g each, with feet
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
CoreStack SlimRisers for the Core ONE+ and Core ONE L
These minimalist riser feet raise your Core ONE+ printer by only 7.5 mm (< 0.3") while giving you valuable storage space underneath for extra build sheets you can use these with our with out the leveling feet. Either option works great
Key Features:
Extremely low profile – barely changes the printer height
Stackable design – print and stack as many levels as you need for unlimited sheet storage
Super efficient: only 20 grams of filament per foot
Universal fit – works perfectly with both the Core ONE+ and the larger Core ONE L
Clean, simple print: 0.2 mm layer height in PLA, no supports, no brim required
Adjustable feet that can be dialed in on each corner as needed
Whether you want just a little extra clearance or a full stack for multiple sheets, these risers give you flexible, space-saving storage without taking up valuable desk real estate.
Printing Recommendations:
Material: PLA recommended
Layer height: 0.2 mm
Infill: 15-20% is plenty
No supports or brim needed
Perfect for keeping your workspace organized and your printer slightly elevated for better airflow or cable management.