1 / 6
Virtual Pinball Plunger – Rubber Band & B10K Slider Pot (for Pinscape) — zdjęcie 1
1 / 6

Virtual Pinball Plunger – Rubber Band & B10K Slider Pot (for Pinscape)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printed analog plunger for virtual pinball cabinets. Uses a rubber band instead of a spring and a B10K linear slider

Ocena
0 / 5
Polubienia
3
Pobrania
31
Wydruki
0
Wyświetlenia
187
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

Analog plunger for your virtual pinball cabinet. No spring — just a rubber band for return force and a B10K linear slider potentiometer hooked up to Pinscape Pico. It works, it feels decent

Almost entirely 3D printed in PLA, some parts require supports. If you want a bit more snap to the return, you can add small rebound springs on the outer section near the knob — I did, but it's optional. The knob has a slot on top where you can drop in whatever logo you like — I went with Deadpool, but it's your cabinet.

The shaft comes in three lengths depending on the thickness of your cabinet playfield board and whether you're using the optional external springs or not — pick the one that fits your build.

What you'll need:

  • B10K linear slider potentiometer

  • 1× rubber band

  • Pinscape / Pinscape Pico controller

  • A few M3 screws

  • small rebound springs (optional)

  • 2x M5 screws (optional)

Tagi