1 / 6
Virtual Pinball Plunger – Rubber Band & B10K Slider Pot (for Pinscape) — image 1
1 / 6

Virtual Pinball Plunger – Rubber Band & B10K Slider Pot (for Pinscape)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printed analog plunger for virtual pinball cabinets. Uses a rubber band instead of a spring and a B10K linear slider

Rating
0 / 5
Likes
3
Downloads
31
Makes
0
Views
187
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Noncommercial

Analog plunger for your virtual pinball cabinet. No spring — just a rubber band for return force and a B10K linear slider potentiometer hooked up to Pinscape Pico. It works, it feels decent

Almost entirely 3D printed in PLA, some parts require supports. If you want a bit more snap to the return, you can add small rebound springs on the outer section near the knob — I did, but it's optional. The knob has a slot on top where you can drop in whatever logo you like — I went with Deadpool, but it's your cabinet.

The shaft comes in three lengths depending on the thickness of your cabinet playfield board and whether you're using the optional external springs or not — pick the one that fits your build.

What you'll need:

  • B10K linear slider potentiometer

  • 1× rubber band

  • Pinscape / Pinscape Pico controller

  • A few M3 screws

  • small rebound springs (optional)

  • 2x M5 screws (optional)

Tags