1 / 5
Panasonic AG-DVX100 Bayonet Tube Grip — zdjęcie 1
1 / 5

Panasonic AG-DVX100 Bayonet Tube Grip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A convenient way to operate the focus ring by moving the fulcrum forward.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
31
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

This is a model that allows to change the default lens hood to extension acessory for a bit more comfortable grip and better focus ring operation. PETG is recommended.


This extention doesn't prevent the installation of a lens cap but may be incompatible with other lens accessories and filters. Just take the measurements from your filter, сreate a volume to subtract with your diameter and stretch it to its full length.

This model holds on camcorder by friction and doesn't use locking notch. It may be loose with your printing settings.


The arhive contains the grip model itself (STEP, 3mf), the source model (F3D) and unfinished lens spacer that replaces the factory made with square hole if you need that. 

Feel free to modify the source project!

Tagi