Nami Burn E Front & Rear Fenders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single printed fender for use on the front and back of a Nami Burn electric scooter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I have seen some of these aftermarket fender-extenders and (it is my opinion that) they are WAY over-engineered. Axle mounts and the extenders and all that seemed a bit ridiculous. I designed this to be printed in one piece and use the factor bolt holes.
I printed it out of clear polycarbonate and then spray painted it black. Would recommend polycarbonate (PC), ASA, or ABS due to it being exposed to the elements. It is secured on with the original screws and a thick zip-tie.
Edit: 10/16/26
I updated the model very slightly and reduced the overhang of the fender. It is now a 90 degree angle and should use a bit less material and easier to print and possibly able to print on a small build plate.