Nami Burn E Front & Rear Fenders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single printed fender for use on the front and back of a Nami Burn electric scooter.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
I have seen some of these aftermarket fender-extenders and (it is my opinion that) they are WAY over-engineered. Axle mounts and the extenders and all that seemed a bit ridiculous. I designed this to be printed in one piece and use the factor bolt holes.
I printed it out of clear polycarbonate and then spray painted it black. Would recommend polycarbonate (PC), ASA, or ABS due to it being exposed to the elements. It is secured on with the original screws and a thick zip-tie.
Edit: 10/16/26
I updated the model very slightly and reduced the overhang of the fender. It is now a 90 degree angle and should use a bit less material and easier to print and possibly able to print on a small build plate.