Trash the Twenty One Pilots Dragon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
model of the dragon named Trash from twenty one pilots album Scaled and Icy
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In the music video for "Choker", a small dragon minifigure is used. They used an existing toy dragon by Safari Ltd that sells for around $1, and yet I've seen people peddle them on ebay for $30+ saying they're exclusive TOP merch. Friends, do not fall for it, you can make your own now for free!
I used Bambu Labs "Image to 3D Model" to create the dragon, then modified in Creality Print slicer: Powered by MakerWorld-Image-to-3D (https://makerworld.com/makerlab/imageTo3d)
PRINT SETTINGS:
0.2 or 0.4mm nozzle
0.16mm layers
with supports
slow speeds (around 100mm/s for PLA, 30mm/s for TPU)
no brim
2 walls
15% infill grid
I recommend using the painted supports in the 3mf file, however your mileage may vary.
I used generic luminous PLA and Filajoy3D blue glow in the dark 95a TPU
Disclaimer: this is meant to be a small print, the original dragon toy itself is only 24mm tall, so I made the model the same size. It should be fine scaled up as high as 90mm, which was the size of the imported model originally, but any bigger might get artifacts and not look as good.