Star Wars themed Phone/ watch charger

This is a stand that was made to use the Geeknet Star wars wireless charger. The LEDs in the bottom of the charger itself can be utilized to light up the stand. I used a translucent blue for the thrust. .20 layer height and only 5% infill. The stand was printed with a ,20 layer height but with a 25% infill. The tie fighter was designed to use a samsung watch charger but also will allow an apple watch charger to work as well. Multiple pieces will need to be glued together. The tie fighter will be assembled by itself and glued together then it slides onto the mount itself and does not need to be glued to the base if you wish to allow you to remove it and remove your charger later without breaking it. wires fit tight and i would recommend a small piece of double sided tape for the bottom of the watch charger pad. you will also need double sided tape for the mounting of the wireless Millennium falcon charger.  you can also print your own Millenium Flacon and insert your own wireless charger pad you will just need to scale it to fit the stand and if you want lights you will need to add your own LEDs. 

Happy Printing!