Yagi Antennas - By Ham Radio Passion (LB8IJ)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting brackets for building the Ham Radio Passion (LB8IJ) Yagi Antennas
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 638
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This are the mounting brackets needed to make Ham Radio Passion (LB8IJ) Yagi antennas. These are lightweight portable antennas made out of 10mm square aluminum tube as boom and 6mm aluminum pipe as elements.
The following video shows how to make a Circular Polarized Cross Yagi for working satellites. But the same brackets can also be used to make handheld yagi antennas.
Demonstrating the handheld version:
3D Printing
I print in PETG
Make sure to print the element holders in the best orientation for strength:

Use 100% infill and supports only on plate.
Antenna Materials
*Note : This post contains AliExpress Affiliate links that support Ham Radio Passion via a small commission from any sales they help generate. It should cost you nothing more.
Boom: 10mm Square Aluminum Tube: Buy at local hardware store
Elements: 6mm Round Aluminum Pipes: Buy at local hardware store
Dipole Core: 3mm Fiberglass Rod: https://s.click.aliexpress.com/e/_c45UQ817
5-minute epoxy: https://s.click.aliexpress.com/e/_c3wX48wz
Matching Cable: 75-ohm RG-59 Coax: https://s.click.aliexpress.com/e/_c3lZy6gp
Phasing Cable: 50-ohm RG-58 Coax: https://s.click.aliexpress.com/e/_c3lZy6gp
SO-239 Panel Mount Connector: https://s.click.aliexpress.com/e/_c4rdQ28v
Ring Lugs: https://s.click.aliexpress.com/e/_c3onyng9
M3 Screws: https://s.click.aliexpress.com/e/_c394LhHJ
Heat Shrink Tube Kit: https://s.click.aliexpress.com/e/_c36Mfj0p