1 / 5
W1GHZ dual-band offset feed mount for DirectTV slimline dish — zdjęcie 1
1 / 5

W1GHZ dual-band offset feed mount for DirectTV slimline dish

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Plug n play mount for the W1GHZ dual-band 10/24GHz offset feed for the DirectTV slimline dish

Ocena
0 / 5
Polubienia
1
Pobrania
21
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This is a mount for the W1GHZ dual band 10/24GHz feed that is designed to fit the DirectTV slimline dish. It is the same angle and position as the original DirectTV LNB, so your feed will be at the focal point of the dish. 

It attaches with the original quick detach mount that comes with the dish. Release the latch, remove the old LNB, plug this in, close the latch. It's that easy. 

I'm using 4mm heat set inserts in the base and 4mm socket cap screws to hold the cap on. 

I printed it with PETG. 0.020" layer height. Solid in-fill.

Special thanks for Andy, WA4BRX, for the help dialing this in + the pictures!

Tagi