W1GHZ dual-band offset feed mount for DirectTV slimline dish
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plug n play mount for the W1GHZ dual-band 10/24GHz offset feed for the DirectTV slimline dish
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a mount for the W1GHZ dual band 10/24GHz feed that is designed to fit the DirectTV slimline dish. It is the same angle and position as the original DirectTV LNB, so your feed will be at the focal point of the dish.
It attaches with the original quick detach mount that comes with the dish. Release the latch, remove the old LNB, plug this in, close the latch. It's that easy.
I'm using 4mm heat set inserts in the base and 4mm socket cap screws to hold the cap on.
M4 Heat Set Insert for 3D Printing
https://www.amazon.com/HANGLIFE-Heat-Set-Threaded-Printing-Components/dp/B0CS6XGMFD
I printed it with PETG. 0.020" layer height. Solid in-fill.
Special thanks for Andy, WA4BRX, for the help dialing this in + the pictures!