Counting matching models…
UPDATE: Requested new variant added (SD Card Slide Holder 5X1+SIM) with SIM removal tool and SIM card adapter. This Micro SD card / SD card holder holds a multitude of cards in a thin light and secure package, with a small detent that…
TTGO Lora32 T3 Slimline Case This case fits both 433mhz and 868mhz versions of the boards marked T3_V1.6.1. I have both running on the home IOT. I've included a picture of the boards I have as there are a confusing amount of different…
Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…
Greaseweazle v4.1 slimline case with access to all the ports & jumpers so no need to open. Based on my original snap shut design for the v4 ( Greaseweazle v4 Slimline Case by TomDD | Download free STL model | Printables.com ). Details of…
This is a remix of krakers665's case . Changes from jeepers01's case : USB C slot instead of micro USB, so it fits lilygo T3-S3 Changes from krakers665's case : Enlarge LED indicator holes Add a light barrier between LED indicators Use…
I have always loved woodworking but in a small apartment in NYC with 3 kids there isn't much time or space for woodworking tools. So I did the next best thing I combined my desire to do some woodworking with my 3D printing and came up…
I found many bin attachments online, some that curve around the machine and others that are free standing. What I wanted was a permanently mounted stand with a bin that sits securely in place, stays close to the machine to save space and…
Wall holder for 15 combination wrenches (6mm to 21mm). Numbers indicate the wrench width, suggested to print in separate color. The Proxxon SlimLine kit fits perfectly. Includes three mounting holes (4mm Spax). I printed with a 0.25mm…
Lighter and slimmer then before with a new improved locking mechanism, prints on average in 30 minutes and uses less then 8 grams of filament. Strong even with silk and easy to print. Print settings - 0.42 wall thickness 0.15% gyroid…
I designed the model to be able to be printed on its back without supports. Here is a link to the battery that I used https://www.aliexpress.us/item/3256802096150819.html. You can see from the pictures that it does have the same snug fit…
Greaseweazle v4 slimline case with access to all the ports so no need to open. Two versions, standard one that needs to be glued together and one that snaps together (latch in filename)
Added a clip for attaching to belt / backpack and making it deeper to fit a 3.7V 102050 Lipo battery pack.
Wanted a very minimalistic enclosure for the optical drive removed from my old laptop. For standard sized slimline SATA Optical Drives and slimline SATA to USB converter. Two screws in side to secure optical drive, but can be used without…
Holds 6 Micro SD cards and 2 Bigger SD cards in a slip pocket for storage
I needed to cut threads into PLA holes, however the usual thread holders are far too large in tiny positions. So, I created a little holder which can be used with 3 fingers to tap threads into holes. Use an M4 screw to lock the tap, if…
Slimline 3.5" floppy disk drive and Greaseweazle ver 4.1 enclosure. This is a remix of a housing for a Greaseweazle ver 4 https://cults3d.com/en/3d-model/gadget/greaseweazle-v4-case The bottom will require supports in the screw holes but…
This is a simple holder for a slimline laptop-style optical drive designed to fit a 5.25" bay (a rare sight in PCs these days, I admit). I tried another model, but my drive didn’t sit well in it—so I decided to make my own. This version…
smaller mount for galileo 2 umbilical.
Remix of jeepers01's TTGO Lora32 T3 Slimline Case that can be mounted to a flat face. Also features an enlarged USB-Hole
Case for LilyGO TTGO T3_V1.6.1
6 SD Card Slimline Case Remix - Made this to beef up the lid.
This is a comprehensive set of cable combs for "slimline" (~3mm diameter) Ethernet patch cables. After obtaining an obscene number of these cables for my rack, I went looking for a suitable set of cable combs for them, but found nothing.…
I bought the Wiha Speed-E II electric screwdriver and loved it. So I ordered all slimbits available and a few handles and made this ultimate holder. The bits are even held in place with magnets (8x2mm) to click in place with a satisfying…
There are already a few 10 inch rack mounts for Zyxel GS1200-8 (and GS1200-5), but this one has some unique features: As slim as possible, to squeeze it into small spots. The holes fit between the 0.625 inch and 0.500 inch sections…
Direct 8040 mount for the Fanatec Clubsport Shifter SQ. Allows left, right, or, centre mounting on aluminium profile. The shifter is big and heavy so will flex a little on this mount. You can reduce this by placing a second piece of…
A simple low profile plug for the Resmed SlimLine CPAP hose, useful for transport (to prevent dust or anything else from entering the tube) or long term storage. I also have a vented plug for day-to-day use. Check my profile. Important :…
I have included the Freecad file incase you want to modify the design. I used 6 2mm socket head cap screws to mount the caps to the main frame. The mount holes were tapped prior to mounting the endcaps. The Freecad file contains a master…
I prefer my LoRa Radio cases to be slimline so I so i can keep them in my shirt pocket, so I designed this. You will need 4x M3 threaded inserts, 4x 6-8mm M3 bolts/screws, 4x M2 6mm, and 4x M2 4mm bolts. I printed my case in Sunlu Easy PA…
Open source foldout key holder designed for FFF in Autodesk Fusion [Full description, assembly instructions and more available on GitHub Keychains are bulky and ugly looking, make a lot of noise and can damage other stuff in your pocket.…
A small, slim enclosure for the Heltec WiFi LoRa 32(V3) . Press-fit, no supports required. To minimize size, there is no SMA mount; antenna pigtail just hangs off the enclosure. Still trying to find a way to keep this design small while…
Added engraved labels to TomDD's version of the slimline case
Remix of Slimline Sliding Micro SD Card with configuration of my choice
I rest my CPAP hose on a cradle by my bed when not in use, but was worried about dust and debris falling into it. To avoid this, I've created this vented plug. The plug covers the top of the tube while letting some air through via small…
Most other business card holder models don't fit Australian standard 90x55mm business cards. I found and really liked the design of @dhiertz but it didn't fit my cards. While at first I tried to change the dimensions in the slicer, the…
Ich habe meinen originalen Bügel verschlampert. Der hier sitzt knackig stramm.
This is a remix of two good Ultimate 64 power socket and power button shrouds for the 64c "slimline" style case (not breadbin style case). This version takes the best of both designs and merges them into one (hopefully) universal design.…
This is remix of the original bracket to accommodate a wider IDE drive optical board. Theoretically, it should still work with the slimmer IDE boards too. The original designer has stated that the original design will work with the IMac…
Firstly, if you want an arcade joystick mechanism more fit for an arcade control panel then click on this link: https://www.printables.com/model/987973-arcade-joystick-mechanism-version-3 That's my Arcade Joystick Mechanism - Version 3,…
This is an improved drip catcher designed for Nespresso Pixie machines*. I originally designed it to allow me to place fatter, taller mugs (such as travel mugs) under the nozzle — the original drip tray design has wings that stick out…
I made an ultimate bitholder for the Wiha slimline bits including the (electric) screwdrivers and charger(see photo's). This is the simpel version with just the satisfying magnetic bitholder. Some CA glue magnet assembly required. In…
Slimline Coke (or similar) bottle auto-drinker. “Through cage” design (ie. will poke through a gap of 50mm (double meshed aviary), allowing the bottle to remain on the outside, and only the drinking reservoir to protrude through. Cover…
All holders mirrored so that the 'pins' of the SD cards are not exposed.
I'm a window tinter and use these knives daily, wanted something to hold them,Holds 20 knives,
Slimline case for the Pimoroni Pico Demo boards, two case designs one for DV and one for VGA option. I've also added a different top with a cut-out for a ZX Spectrum rainbow badge for those that want to use the case for a ZX Spectrum…
Photo is of the regular container with a standard speed loader and an M4 mag for scale. Container: Self-winding high cap mags, either wire or wheel wound, hold about 25-35 in the feed tube that can't be fired due to the design. Short…
Print Print four parts overall. Each side consists of two parts facing eachother. 30% Infill and 2 bottom/toplayers are enough to be pretty torsion-resistant. BOM: 8x M3x12 Screws + Nuts 4x Toothless Pulleys with 5mm Bore Assembly The M3…
This is a modular holder for USB adaptors and plugs. The base holder will hold up to 12 USB A plugs, and there are modules for supporting all kinds of other USB plug. The modules are quite a tight fit into the base, so I also created a…
This is a slimline case for the HAS (Home Arcade System) JAMMA Extender. This case allows the extender to be plugged into arcade boards that are in cases that may not allow enough clearance to use the standard extender plexi case. When…
This organizer is part of a set that I am busy creating for our complete cutlery set from eetrite. Kitchen & Dining Products | Eetrite
Unlike the original design, I flipped the drip tray and adjusted its dimensions so it stays securely in place during use and doesn’t fall out after assembly. This model is also designed to naturally return to its original position,…
I wanted to design a lower profile screen bezel for the P1P as my first test print. This model has a snug fit and small wall thickness compared to other models. I have added finger clearance to the bottom of the part to still allow the…
The pictured version has the opening on the wrong side so that a lot of glue is needed to hold the cables in place. it also has only the one screw hole that is required for my Dell Optiplex 7010 small form factor PC. You should print…
In order to mount the E3D titan slimline motor some mods to the top linear bearing holder needed to accommodate the wiring connector https://e3d-online.com/nema17-slimline-stepper-motor There are 2 types of bearing holder. 1 with just a…
The older model of Paxton reader (for net2) will mount nicely to a standard single blanking plate and I've used this method before. Had single back boxes fitted at my latest project only to find the new slimline P10 readers are larger and…
Remix of of the "Slimline Sliding Micro SD Card / SD Card Holder - Multiple Sizes" but holds only 2 sd cards. Only us the tight version if you want a REALLY tight fit on the latch Versions: 2x works good 1x is VERY tight, i advise to use…
I wanted a waste filament collector that was small enough to fit within the printer footprint and also seal the waste filament port to reduce noise and air flow. It tucks perfectly behind the stock spool holder and does not obstruct…
A slimline wallet made of two identical plates and elastic. Materials About 150mm of 30mm wide elastic strap Thread and needle I used standard PLA Assembly Notes Print two of the included file with 4-5 bottom/top layers Cut elastic into…
A slimline notepad holder for the side of your desk. Currently supports 20mm sized rings and a 14mm size notepad. Comment if you'd like some more variants! Printed with Bambu PLA Basic with a brim
I needed a slimmer lid to the original one to go on the bean hopper so i could slide the coffee machine under a shelf in the kitchen. Printed this off in TPU and it works a treat.
XOLcPAP UHF Ducts for direct fitting of the OD 18mm tube.
This works pretty well. I printed on a k2 combo in PETG. I would recommend using supports on all overhangs, but it will work if you only use supports on the big overhang (or at least it did for me).
I designed this while doing my van conversion to extend the bolts for a flettner slim ventilator. Not the most complex model in the world but it does the job, I've included the F360 files in case people would like to remix it to different…
This adapts the Nooelec GOES Satellite Dish to the DirecTV Slimline Back Assembly model number Bau4r2 The mounting hardware the Nooelec comes with is barebones at best (couple U bolts and a 90 degree metal bracket) which does not give the…
Firstly, if you want an arcade joystick mechanism more fit for an arcade control panel then click on this link: https://www.printables.com/model/987973-arcade-joystick-mechanism-version-3 That's my Arcade Joystick Mechanism - Version 3,…
I wanted to mount my pizza peel to the wall, but it needs to live behind where a cabinet door unfolds, so I needed it to take up as little depth as possible. So I designed this to hold the peel as close to the wall as possible. For the…
I found many bin attachments online, some that curve around the machine and others that are free standing. What I wanted was a permanently mounted stand with a bin that sits securely in place, stays close to the machine to save space and…
XOLcPAP UHF Ducts for direct fitting of the OD 18mm tube.
This adapts the Nooelec GOES Satellite Dish to the DirecTV Slimline Back Assembly model number Bau4r2 The mounting hardware the Nooelec comes with is barebones at best (couple U bolts and a 90 degree metal bracket) which does not give the…
I prefer my LoRa Radio cases to be slimline so I so i can keep them in my shirt pocket, so I designed this. You will need 4x M3 threaded inserts, 4x 6-8mm M3 bolts/screws, 4x M2 6mm, and 4x M2 4mm bolts. I printed my case in Sunlu Easy PA…
I bought the Wiha Speed-E II electric screwdriver and loved it. So I ordered all slimbits available and a few handles and made this ultimate holder. The bits are even held in place with magnets (8x2mm) to click in place with a satisfying…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE: October 12th 2024. Added a money clip. Print with a…
I wanted to mount my pizza peel to the wall, but it needs to live behind where a cabinet door unfolds, so I needed it to take up as little depth as possible. So I designed this to hold the peel as close to the wall as possible. For the…
This is an external slimline disc drive enclosure. It was designed around a 12.7mm Disc Reader out of an old Dell Optiplex, but any Laptop/Small Form Factor 12.7mm DVD/CD Drive will fit. (9.5mm drives may fit too with a bit of ingenuity)…
I wanted to get some LED lights into my Frontrunner handles without actually hooking up cables on the roof of my van, so I designed a socket that holds watertight and battery-powered LEDs , which I bought off of Amazon. The Frontrunner…
I created a simple pen blank kit that can easily be adjusted to create shapes for Slimline Pen Kits. I chose to make the attached model the exact size in order for me to drill out the center for the pen tube. Attached is the Fusion 360…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Holds calipers and 2 LR44s. Hangs on Skadis. What else is there to say?
Overview I have my printer in a corner where the rear and right of the machine are very close to a wall so I have made a few modifications to allow this (see my other models). I needed to be able to empty the pot without moving the…
*UPDATED* - V2 has been updated to have a more slimline and aesthetically pleasing look (Actually somewhat symmetrical compared to V1..) My first go at designing something a little more complex than a box.. I needed a phone stand for my…
This lens cap is thinner than the lens caps that come with the Sony Lenses! After getting annoyed at how large some of the lens caps I had on my lenses were (looking at you tamron), I remixed the original design from LXO, and with these…
Arduino UNO R4 Wifi Slimline Case This case has been designed for the Arduino UNO R4 Wifi board. (or the non Wifi Version) The cover clips into place without the need for screws The board is fixed to the base with 4x M3x4 screws. Printed…
Freenove Connect V5 Slimline Case This case has been designed for the Freenove Connect V5 board. (or the UNO R4) The cover clips into place without the need for screws The board is fixed to the base with 4x M3x4 screws. Printed on 0.2mm…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is a case designed for the b5s4 XA1541 Active - a device for reading and writing C64 / C128 and VIC-20 disks using an original Commodore floppy drive on a PC OnShape Model…
This is a 40mm mount for an LNB or Feedpoint that is designed to fit the DirectTV slimline dish. I designed it for the I0JXX Parabolic Antenna Feedpoint for 10GHz ham radio, but it easily can be used for others. It is the same angle and…
A slimline wall-mount dimmer switch plate for the Hue Dimmer (v1) Space for 2x bar magnets on the rear (20 x 6 x 1.5mm) - use a strong magnet such as Neodymium with 1.5kg+ strength. Check Amazon for Magnet Expert products.
I remixed this for a slimmer profile for easier removal. f3d file included so you can tweak as needed.
Frontrunner sells these replacement parts for absurdly expensive, its really annoying. Tried modelling one since it seemed geometrically simple ish. Turned out decent, not perfect, but is very strong and does the job. I printed it with…
This is a mount for the W1GHZ dual band 10/24GHz feed that is designed to fit the DirectTV slimline dish. It is the same angle and position as the original DirectTV LNB, so your feed will be at the focal point of the dish. It attaches…
Thanks to https://www.printables.com/@CADScott for this Design !
I didn’t like the original design of the lack door handles and decided to remix my own. These use 6x3mm round magnets which i glued into place, and i glued the door handles onto the perspex. I printed these in ABS put PETG will also work…
27/07/26 Improved buttons Note : This is very slim, about 1mm thickness, so if you constantly drop your phone, maybe a stronger case is advisable. Thanks to Bibiscus for the HD phone model Like i said above, Pixel 10 and 10 Pro case/cover…
Tired of misplacing the small remote for your LED lights? This is a sleek, low-profile wall mount designed specifically to keep small, slim remotes right where you need them. While originally modeled for outdoor lighting controllers, its…
This is a slimline macbook pro stand, there are two channels to run cables under the laptop on either side. This stands the laptop 12mm off the desk which is just enough for airflow + up to a 9mm cable while keeping the laptop mostly flat…
This is a mold for casting epoxy around slimline pen tubes. Pen tubes should have an ID of 6.35mm (¼"). Designed around tubes with a length of 52mm. I suggest putting some wax or something to help seal the hole and keep epoxy out of the…
Replacement button for Kmart Slimline Touch Top Bin https://www.kmart.com.au/product/38l-slimline-touch-top-bin-41964187
A hinged slimline chess board Easy to print - no supports Use your 1.75 filament to thread through the hinges Can be used with any of my chess sets which are in my chess collection on my profile page @3DPrintBunny
Now I know you're gonna tell me that hardly anyone uses optical drives any more. But I still do! Only occasionally, it's true! But I still like the convenience of simply opening a tray and whacking in a disc when needed, rather than…
Slimline poop chute bucket allowing the printer to be placed close to the wall
