1/10 Scale RC Car Wheel Set - Rims and Beadlock TPU Tyres - OR silicone molds. ADDED Slim versions of all tyres
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of 3 different rims and tyre types for 1/10 scale RC cars. Compatible with standard 12mm Hex hubs. 1/10 scale
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 57
- Wydruki
- 2
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
A 1/10 scale rim and tyre set compatible with standard 12mm hex hubs on RC cars.

The tyres come in 3 different types, slick, paddle and trail and have been designed to be easy to print cleanly in TPU without supports (apart from the trail tyre).
All 3 rims are the same size and push fit design as all the tyres, so you can mix and match. The push fit design perfectly holds the tyres inside the rim with zero slip, no glue required! The grip bars also add extra strength to the rims side wall as a bonus.
The rims will all print face down (good for holographic plates), without supports, but for a cleaner centre hole i suggest support painting that small part as shown (auto supports should do it fine too).

Assembly is very simple, push your 12mm hex hub into the hex hole, push your chosen tyre over your chosen rim making sure the grip bars are aligned as you do so. Bolt them on to your car, done!
Print settings. You guys know your printers but what i did for the rims was 0.2 layer height with 3 walls in PLA and they feel very strong and havent broken yet, but would recommend PETG/ASA or ABS for longevity.
For the tyres it's TPU as soft as you can, i used 85a because its what i had. Im not an expert in printing with TPU and there is many factors you can adjust to alter the softness of the tyres - the walls, TPU type, infill density and pattern etc. I went with 2 walls and 7% TPMS-D infill pattern because it looked pretty and i used clear red TPU. They feel nice and tyre like.
[UPDATE]
Added silicone molds for all tyres and an optional printable reinforcement rings to stiffen the silicone.
Having made the normal tyres in silicone i found they are very heavy, probably too heavy for most RC drive trains, i will leave the files up for anybody with better materials to work with. But i highly suggest using the slim molds!
I have now uploaded the molds for all the slim tyre styles. I've made both the paddle and slick tyres in clear silicone with a green reinforcement ring, they look awesome and the grip is insane, also they are similar weight to stock tyres now. I imagine anyone who uses these will know what they are doing but i will give you a brief rundown of how i went about it.
First off, they may not be essential as i havent tried them without, but for the TPU reinforcement "rings", they come in a print flat file. Fold them round and heat the ends together with a soldering iron, i wouldn't use super glue as it tendsto mess with the silicone curing and melting the tpu together is very strong if done cleanly. I have added a correctly sized jig to pull the ring over to let it settle in a nice shape.


Next spray your mold release into the molds and allow to dry. Place the reinforcement ring (without the jig), inside the mold and close the 2 sides together ensuring the 2 sharp cornered posts are matching.

The holes for pouring into are rather small as the side walls of the tyre are small so ive supplied a "pouring tube" that you can hot glue over both holes of the mold. You can clamp if you want but i found sticky tape works fine to hold the mold together. Keep filling a tube on one side until it starts to fill the tube on the other side, allow for an inch or 2 excess silicone in either tube to ensure there is enough for degassing. I used 30A silicone which will self degass to a degree but i found helping it along with a vibrating device works wonders for the final result. A vacuum chamber would be ideal but i dont have one yet.

Opening the mold can be a test of strength but a blunt flat metal object inserted and given a slow twist on all sides made it easier. I printed the molds with 3 walls so that they could hold up to the force of demolding better and they work great so far.

Trim of the excess and there you are, a very pretty and grippy tyre. Also with silicone the colour options are endless!
