P
Printables
Hankook tyres log for office \ workshop
Hankook tyres log for office \ workshop
Wyniki wyszukiwania: tyres
Liczymy pasujące modele…
P
Printables
Tyres for Tamiya F102
I needed new tires for my model car, and since they were no longer available, I designed them myself using Fusion 360 and printed them with TPU. I only had natural TPU available; black would certainly have been better. It works so far,…
P
Printables
tamiya blitzer beetle drift tyres
just some tyres that fit the tamiya blitzer beetle that allow the car to slide around on smooth surfaces. use fuzzy skin for wheel texture. pictures show previous version with short side walls, new design matches oe wheel size
P
Printables
Silicon rubber tyres mold (Robot rims included ⌀35)
3d models of the mold used to build tyres for Megahub's educational robot. It depends from the silicon rubber that you're using but usually you have to wait 6-7 hours to dry the entire part (i suggest to wait 12 hours in anycase). Whatch…
P
Printables
Off road tyres for 6,5" hoverboard motors (240mm OD)
Intro: These are the rear tyres developed for the Breezebuggy outdoor play car (Paid model), but they can probably be used in other applications where hover board motors are desirable. The size allows for good volume to incorporate some…
P
Printables
Stud-prepared TPU tyres for 6,5" hoverboard motors
These are a pair of rear tyres modeled for the Breezebuggy rideon playcar (paid model) that fit standard 6,5" hoverboard motors. The tyres might come in handy for robot projects or similar that uses hoverboard motors and need some extra…
P
Printables
1/10 R/C Buggy Carbon Wheels & Tyres set (for Kyosho Triumph)
This is a carbon fiber set of wheels and tyres for a vintage Kyosho Triumph buggy. I believe they would work on other 1/10 r/c buggies but I only tried them on the Kyosho. Because of the tolerances to correctly fit the bearings and axles…
P
Printables
Ardumower robotic lawnmower 25cm frontwheel and 12cm backwheel with TPU-tyres
Robotic lawnmower replacement for front- and backwheel. Frontwheel with wider profile. The built tire consists of 3 parts so that it can be printed on a Prusa printer. Printed with PCTG or PETG with 20% infill an 4 perimeters. Tyres…
P
Printables
TPU Reifen / Tyres for Selecta Karussell 62031
The two white O-rings got lost on this kids toy so I made some beefier TPU tyres as well as an inner ring for the friction wheel for the carousel itself. Print the "Reifen"-File 2 times and the Ring file 1x. Category: Toy & Game Accessories
P
Printables
Tyres for reaper model (3DSets)
Print on TPU (I used smart materials flex 93A) Layer: 0,15 mm. Top and bottom: 1,2 mm. 3 perimeters Lightning infill 15% (cura)
P
Printables
Brompton Advanced Roller Wheel Replacement Tyres
If you found this, you probably know what this is! Designed to be printed in 95A TPU so you can stretch the tyre over the lip of the wheel. I recommend printing with .2mm layer height and 4 layers top and bottom. I use a .6 nozzle and do…
P
Printables
Tyres for Dinky Toys 197 - MORRIS MINI TRAVELLER
This Dinky Toys model came back to me when my mother moved to the nursing home. As it was heavily used by my younger brothers, I had to do some cleaning. Unfortunately the tyres were missing. So I designed and printed the tyres with black…
P
Printables
RC tyres OD85mm=3.3" ID56mm=2.2" W20mm=0.8"
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
P
Printables
RC tyres OD85mm=3.3" ID56mm=2.2" W 28mm=1.1"
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
P
Printables
RC tyres OD85mm=3.3" ID56mm=2.2" W38mm=1.5"
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
P
Printables
RC tyres OD85mm=3.3" ID48mm=1.9" W 20mm=0.8"
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
P
Printables
RC tyres OD85mm=3.3" ID48mm=1.9" W28mm=1.1"
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
P
Printables
RC tyres OD85mm=3.3" ID48mm=1.9" W38mm=1.5"
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
P
Printables
Rim for temu 1/10 scale tyres open RC F1
Rim for temu 1/10 scale tyres open RC F1 For tyres 46mm id 26mm wide
P
Printables
Mold for 1/87 highway truck tyres
This is a resin-printed mold designed specifically for casting silicone tyres for trucks in 1/87 scale. This mold allows hobbyists and model builders to produce functional, flexible tyres that closely replicate real-world performance and…
P
Printables
Better Tyres/wheels for LEGO 10330 McLaren Senna Formula 1
Realistische Reifen/Räder fürs Lego Modell mit Schriftzug aussen und innen. Gedruckt in PLA mit MMU
P
Printables
Tyres for Tamiya F102
I needed new tires for my model car, and since they were no longer available, I designed them myself using Fusion 360 and printed them with TPU. I only had natural TPU available; black would certainly have been better. It works so far,…
P
Printables
tamiya blitzer beetle drift tyres
just some tyres that fit the tamiya blitzer beetle that allow the car to slide around on smooth surfaces. use fuzzy skin for wheel texture. pictures show previous version with short side walls, new design matches oe wheel size
P
Printables
HP Robots Otto: TPU Tyres
Easy to print TPU Tyres for Otto. Printed in TPU with 15% infill. you can experiment with infill type and density for different stiffness. Easy to install, just stretch the tyre carefully over Otto's wheel. Happy wheelin' !
P
Printables
Sand Weight Core for Mario Kart Live Tyres
I've made a bunch of these tire barriers from Makerworld: https://makerworld.com/en/models/636438-mario-kart-live-rc-car-tyre-wall They're great, but they're very light and don't hold up to crashing well. This model is a small capped tube…
P
Printables
3d Printed Tyres Stl file for mar Rover
Stair Climbing Rover Tyres 3d Stl File Please refer this URL for Rovers: Tyre Inner Dia: 80mm Outer Dia : 98mm
P
Printables
1/10 Scale RC Car Wheel Set - Rims and Beadlock TPU Tyres - OR silicone molds. ADDED Slim versions of all tyres
A 1/10 scale rim and tyre set compatible with standard 12mm hex hubs on RC cars. The tyres come in 3 different types, slick, paddle and trail and have been designed to be easy to print cleanly in TPU without supports (apart from the trail…
P
Printables
WILLYS JEEP - rims and tyres
In this Thing I have separated the rim and tyres for my Willys Jeep, so they can be printed in different colors and materials. Original Thing: https://www.thingiverse.com/thing:4834434 Category: Vehicles
P
Printables
Rim Shield protection for replacing tyres
When you want to replace your tyre on, for instance, your motor Cycle you want to protect your rim. Rim Shiels or Protectors are the things to use! Print with heavy fill in! (like 80%) Print on the side! (The stl should be in the right…
P
Printables
RC Plane Wheels and Tyres Tires
My attempt to design and print RC Plane Wheels and Tyres (or Tires) Tyre sizes are 2 and 3 inch outer diameter, in both a wide and narrow format Rims are also in wide and narrow format, with either 3mm or 4mm holes for axles. Tyres where…
P
Printables
Tyres with rims for the Kyosho zx5
Tyres with rims for the Kyosho zx5 Rims printed with pla and tyres printed with polyflex and glued with contact adhesives. Print Settings Printer: Reprap Ormerod2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Notes: Supports only…
P
Printables
Mould for Silicone Robot Tyres
Introduction The first version of Scotbot had simple 3D-printed wheels, intended to fit onto cheap TT-motors and use a rubber band as a tyre. But… the rubber bands I had were too narrow and thin, and there wasn't enough traction for the…
P
Printables
BBS RS WHEEL FOR LEGO TYRES 18mm
Made this BBS RS looking mesh wheel for LEGO tyres, give it a try let me know if it works. This is a work in progress at this moment. Back surface is flat so less support is needed. LIKE - SHARE - COMMENT - TIP - POST A MAKE Take a look…
P
Printables
Tyres for RC car
Front and rear tyres for an RC car, to be printed in TPU. For 50 mm rims, the actual inner diameter of the tyres is approx. 49.5 mm so it's a nice “press fit” (add some glue if needed). Can be printed without supports. I printed mine in…
P
Printables
SCARBO SVF1 Alternative tyres
R1 > Radial grooves added R2>Traditional tread tyres adapted from https://www.thingiverse.com/thing:4892947
P
Printables
Rim protectors (17"/18") for changing tyres
I needed to remove the tyre from the rim of my NSR50 project and didn't want to damage it any more than it already is, so I designed these rim protectors. Note: The NSR's rims are pretty skinny, so I've included a small test piece so that…
P
Printables
SCX24 Deadbolt - Rock Sliders Big Tyres Edition
After being disappointed the original model didn't fit my Deadbolts big tyres I decided to try and shrink them a little and stop them rubbing on the front wheels I'm still a beginner at CAD & 3D printing but I think these came out alright…
P
Printables
Tyres for Matchbox Big Bull n°12
Wanted to do some tyres for this big bull instead of caterpillar tracks (I need to try this also one day). Was printed with TPU at 30m/s.
P
Printables
Messerschmitt Bf109 / Me109 Scale Tyres for Wheel
Scale Messerschmitt Me109 tyres with 90mm outside diameter.
P
Printables
Rear tyres - OpenRC Tractor MK3 TEA20
The OpenRC MK3 Tractor is a great model. Just about the only thing I didn't like on it though are the rear tyres. To me, they didn't quite have the look of “real” tyres. I've printed them out of PLA. These are printed in two pieces that…
P
Printables
Pirelli tyres with wheel cart
It is made in different parts. The block of wheels are made all in one, however, the leters in the upperside are done in another print. Also the wheel cart, is done in parts, one is the base and the other the handle. This one is the only…
P
Printables
Brompton Eazy Tyres
A printable rubber (eg NinjaFlex or other PU) tyre to fit on the standard Brompton bicycle rollers. It makes them a little larger, but not as much as the Eazy Wheels. It makes them much quieter, but of course adds no bearing. Print…
P
Printables
Tyres for American Tourister/Samsonite Spinner
My luggage was annoyingly loud when pushing/dragging across pavement, so I made these flex tyres to cover the plastic wheels. They are 49mm in inner diameter and should fit all Samsonite/American Tourister checked spinner luggages with…
P
Printables
LEGO compatible wheel/rim for 43.2x22 tyres
This is a custom rim designed to fit the popoular LEGO 43.2x22 tyre size. I was kinda unhappy with the stock rims because they don't really look realistic, which is why I decided to print my own. I got the outer part of the rim from…
P
Printables
WPL D12 Drift Rims and Tyres
These are Drifting the WPL D12 very well, bone stock! Even better when upgraded Remix of a 1:10 scale RC Drift Rim (Source file/Author unknown; will 100% credit when I find it, Thingiverse) Remix of Gadoga "Tamiya M Chassis Drift Tire…
P
Printables
wheel for 68mm RC rubber tyres
Wheel hub for 68mm RC rubber tyres, designed to be fitted on a M5 Allen head bolt with a 4mm M5 nut.
P
Printables
Tyres for Herringbone Planetary Gear | Truck & Motorcycle fidget toy accessories
Transform your Herringbone Planetary Gear from awesome test print and pretty-good fidget spinner into an awesome test print AND an awesome fidget spinner. Video meetings are boring without a fiddle-toy, but I was frustrated that this…
P
Printables
Realistic tyres/wheels for LEGO 10330 McLaren Senna Formula 1 car
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
P
Printables
Valve indexing caps for car tyres, v.4
Updated to version v4.1: Reported that overhang (and other possible print material remains) inside the caps' hole may deflate a tire, therefore: The caps height increased by 2 mm. The caps inside hole end is modified to conical shape,…
P
Printables
LEGO set 10330 McLaren Senna Formula 1 car tyres/wheel with or without logo's
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
P
Printables
Realistic tyres/wheels for LEGO 10330 McLaren Senna Formula 1 car dual color flat letter
Made the goodyear eagle text flat with the tyres so it looks more like it's printed on. v1: Was my first version and gives the letters a faded look. The backtyre is not fully optimized and prints extra white in de tyre it self. v2 does…
P
Printables
Silicon rubber tyres mold (Robot rims included ⌀35)
3d models of the mold used to build tyres for Megahub's educational robot. It depends from the silicon rubber that you're using but usually you have to wait 6-7 hours to dry the entire part (i suggest to wait 12 hours in anycase). Whatch…
P
Printables
LEGO Porsche 911 RSR Slick Tyres with new Rim
I wanted Slick Tyres on the Model with the original tyre size. So it doesnt have the ground clearance of a monster truck Rim and Nut are with normal PLA. The Tyre ist out of TPU/Flex Filament. I also added a Rim if you want to use the…
P
Printables
Cycle Tyres store Wall Mount
Wandhalter zur schonenden und gleichzeitig platzsparenden Aufbewahrung von Fahrrad Reifen. In dieser Version für 28/29" bzw. 622er Durchmesser. Mit der mitgelieferten Fusion360 Datei kann Radius und Länge des Wandhalters beliebig geändert…
P
Printables
75 mm light weight balloon tyres, hub and tyre
The Tyre is in eLastic and the hub Carbonx EZPC+CF Quite soft tyres
P
Printables
Prost version LEGO set 10330 McLaren Formula 1 car tyres/wheel with logo's
I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh
P
Printables
F1 Pirelli Tyres Coaster v2
🚨 UPDATE : Just add a version of the coaster holder with F175 logo🚨 I saw different types of F1 coasters online and decided to make my own versions from scratch using Fusion 360. Bear with me as I'm still learning this software. I modeled…
P
Printables
LEGO set 10330 McLaren Senna Formula 1 car tyres logo's no numbers
LEGO set 10330 McLaren Senna Formula 1 car tyre with logo's and no number My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original F1…