ESP32 + CC1101 Case (USB-C Devkit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the ESP32 Devkit V1 with the USB-C port. Dimensions must be around 52mm x 28mm.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 336
- Wydruki
- 1
- Wyświetlenia
- 949
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is a case for the newer ESP32 Devkit V1 with the USB-C port. Dimensions must be around 52mm x 28mm.
This case allows for the use of Dupont connectors, rather than requiring soldering. All wires can be stored below the ESP32. I used 10cm wires looped around that that worked well.
STEP file has been uploaded, but here is the original design in OnShape.
This project is for controlling 8 Somfy RTS roller shade motors using ESPHome and Home Assistant. It uses this library on the newest Home Assistant that has the new Radio Frequency ESPHome integration.