ESP32 + CC1101 Case (USB-C Devkit)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for the ESP32 Devkit V1 with the USB-C port. Dimensions must be around 52mm x 28mm.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 336
- Makes
- 1
- Views
- 949
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
This is a case for the newer ESP32 Devkit V1 with the USB-C port. Dimensions must be around 52mm x 28mm.
This case allows for the use of Dupont connectors, rather than requiring soldering. All wires can be stored below the ESP32. I used 10cm wires looped around that that worked well.
STEP file has been uploaded, but here is the original design in OnShape.
This project is for controlling 8 Somfy RTS roller shade motors using ESPHome and Home Assistant. It uses this library on the newest Home Assistant that has the new Radio Frequency ESPHome integration.