PolyDryer Box Spool Holder, Ball Bearing Axle, Shaft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smooth-running, bearing-supported filament holder for the Polymaker PolyDryer
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 22
- Wydruki
- 2
- Wyświetlenia
- 181
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- BSD License
Filament holder for the Polymaker PolyDryer container using 6904-2RS bearings (20×37×9 mm).
Inspired by the holder created by Clough42 and its later remixes by LencoSolutions, Eric Keiffer, and MakingMedicalPhysics, I decided to create my own version.
The parts are designed with a tight fit to prevent them from sliding off the axle. Some force is required to press the bearings onto the axle and the bearing bridge onto the bearings. If you are unable to assemble the parts, calibrate your extrusion multiplier.
Print settings for:
- PolyDryer Spool Holder - axle.stl
- PolyDryer Spool Holder - collar with handle.stl
- PolyDryer Spool Holder - collar.stl
Layer height: 0.2 mm
Perimeters: 3
Top and bottom solid layers: 5
Infill: 15%
Print settings for:
- PolyDryer Spool Holder - bearing bridge.stl
Layer height: 0.2 mm
Vase mode: enabled (1 perimeter)
Top and bottom solid layers: 0
Extrusion width: 0.8 mm (printed using a 0.4 mm nozzle). See PolyDryer Spool Holder - bearing bridge.3mf