1 / 13
PolyDryer Box Spool Holder, Ball Bearing Axle, Shaft — image 1
1 / 13

PolyDryer Box Spool Holder, Ball Bearing Axle, Shaft

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Smooth-running, bearing-supported filament holder for the Polymaker PolyDryer

Rating
5 / 5
Likes
10
Downloads
23
Makes
2
Views
191
Reviews
2

Updated at source:

Model information

Category
Accessories
License
BSD License

Filament holder for the Polymaker PolyDryer container using 6904-2RS bearings (20×37×9 mm).

Inspired by the holder created by Clough42 and its later remixes by LencoSolutions, Eric Keiffer, and MakingMedicalPhysics, I decided to create my own version.

The parts are designed with a tight fit to prevent them from sliding off the axle. Some force is required to press the bearings onto the axle and the bearing bridge onto the bearings. If you are unable to assemble the parts, calibrate your extrusion multiplier.

Print settings for:
-  PolyDryer Spool Holder - axle.stl
-  PolyDryer Spool Holder - collar with handle.stl
-  PolyDryer Spool Holder - collar.stl
Layer height: 0.2 mm
Perimeters: 3
Top and bottom solid layers: 5
Infill: 15%

Print settings for:
-  PolyDryer Spool Holder - bearing bridge.stl
Layer height: 0.2 mm
Vase mode: enabled (1 perimeter)
Top and bottom solid layers: 0
Extrusion width: 0.8 mm (printed using a 0.4 mm nozzle). See PolyDryer Spool Holder - bearing bridge.3mf

Tags