1 / 3
Parametric Navimow i-series Antenna Fence Mount (i105, i108) — zdjęcie 1
1 / 3

Parametric Navimow i-series Antenna Fence Mount (i105, i108)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parametric fence mount for the GPS-RTK Antenna of the Segway Navimow i105 and i108 Series

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This is a fence mounting clip for the GPS RTK Antenna for the Navimow i-Series. You'll additionally need 2 M3 Screws, Nuts and (optionally) Washers, or 2 Zip-ties.

The model should print fine without supports if you print it as-is with the given orientation, though I'd recommend adding paint-on supports for the round shaft of the Antenna, like below:

I've printed it exactly like this this in PETG on my Creality K1: Only paint-on supports for the top-side of the shaft & no brim.

The STL is rendered using the model's default parameters. This is an OpenSCAD model, so you can freely adjust it to the exact parameters of your fence!

Tagi