Parametric Navimow i-series Antenna Fence Mount (i105, i108)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric fence mount for the GPS-RTK Antenna of the Segway Navimow i105 and i108 Series
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- GNU General Public License v3.0
This is a fence mounting clip for the GPS RTK Antenna for the Navimow i-Series. You'll additionally need 2 M3 Screws, Nuts and (optionally) Washers, or 2 Zip-ties.
The model should print fine without supports if you print it as-is with the given orientation, though I'd recommend adding paint-on supports for the round shaft of the Antenna, like below:

I've printed it exactly like this this in PETG on my Creality K1: Only paint-on supports for the top-side of the shaft & no brim.
The STL is rendered using the model's default parameters. This is an OpenSCAD model, so you can freely adjust it to the exact parameters of your fence!