1 / 2
32mm hose adapter for Makita SP6000 track saw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to fit 32mm vacuum hoses to the Makita SP6000 track saw.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapter to fit 32mm vacuum hoses to the Makita SP6000 tracksaw. Use a bit of masking tape if the fit is too loose. Saw still fits into the macpac with attached adapter.
Printed from Elegoo PLA+ with 0.2 mm layer height, 2 wall loops, 15% infill without brims.