1 / 3
OPPO Find X9 Ultra Case with MagSafe — zdjęcie 1
1 / 3

OPPO Find X9 Ultra Case with MagSafe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU protective case for the OPPO Find X9 Ultra with magnets.

Ocena
0 / 5
Polubienia
4
Pobrania
53
Wydruki
0
Wyświetlenia
406
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a 3D printable case for the OPPO Find X9 Ultra.

Features magnetic ring support, and extra protection on the corners.

Instructions

The main body should be printed in TPU, I used some 64D TPU.

  • I painted on a Fuzzy Skin modifier in Orca Slicer to give it more grip on the outside.

  • May require supports for the button holes. 

Buttons work best in a normal plastic such as PLA.

  • Use a thin piece of tape to secure them to the inside of the case.

The camera protector can be printed in anything, but TPU is best for protection.

  • Requires supports, can be printed in either flat orientation.

Magnets and camera bump can be glued or taped in place.

Supports

I used a Sharpie marker on the support interface for clean surfaces, following the instructions here, as normal supports with TPU are hard to remove.

Magnets

I bought the magnets from AliExpress. Here are the measurements: (Listing says 0.2mm thick but the entire thing measures to around 1.2mm). I left the blue part attached, but you may need to remove it depending on the orientation of the magnets. (I bought some once that were the wrong way around)

Other

I plan on making another version of the camera bump that covers more of it leaving smaller holes for the lenses. If anyone wants I can upload a version without the magnets at all, or the STEP files if you have different magnets.

Also on MakerWorld!

Tagi