OPPO Find X9 Ultra Case with MagSafe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU protective case for the OPPO Find X9 Ultra with magnets.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 53
- Makes
- 0
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D printable case for the OPPO Find X9 Ultra.
Features magnetic ring support, and extra protection on the corners.
Instructions
The main body should be printed in TPU, I used some 64D TPU.
I painted on a Fuzzy Skin modifier in Orca Slicer to give it more grip on the outside.
May require supports for the button holes.
Buttons work best in a normal plastic such as PLA.
Use a thin piece of tape to secure them to the inside of the case.
The camera protector can be printed in anything, but TPU is best for protection.
Requires supports, can be printed in either flat orientation.
Magnets and camera bump can be glued or taped in place.
Supports
I used a Sharpie marker on the support interface for clean surfaces, following the instructions here, as normal supports with TPU are hard to remove.
Magnets
I bought the magnets from AliExpress. Here are the measurements: (Listing says 0.2mm thick but the entire thing measures to around 1.2mm). I left the blue part attached, but you may need to remove it depending on the orientation of the magnets. (I bought some once that were the wrong way around)

Other
I plan on making another version of the camera bump that covers more of it leaving smaller holes for the lenses. If anyone wants I can upload a version without the magnets at all, or the STEP files if you have different magnets.
Also on MakerWorld!