10 inch rack 1U 2x QNAP 3.5 drive bay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1U 10" lab rack that uses QNAP 3.5" hot swap caddys
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 701
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Intro
This was inspired by the models created by @OloDeepdelver. I have a bunch of dead QNAPs (thanks to the Intel/LPC bug) so I designed a model to reuse the QNAP drive caddies that I already have.
I plan to make a 3U version but it's very low on my to do list. If anyone wants to see that sooner, message me.
Print Settings
Print it face down. It would look prettier with supports but doesn't need it. I recommend >4 perimeters/top/bottom layers. I've used PETG CF and keep it on the bottom of the rack.
Vitamins
In order to complete this model, you need:
2x SATA M/F adapter (can be found on Amazon/AliExpress/eBay)
4x M3x8mm screws
2x QNAP 3.5" caddies (mine came from the TS-853 Pro)