Neotoy Deluxe Palette

2026-10-01 Update: reworked the base design a bit to strengthen the core structure, this should theoretically reduce warping and allow the various faces of the palettes to align more precisely and reliably. I also added 3mf files with my preferred settings. For me at least this gives more reliable printing results. The project is split into three plates now (for the same reason).

========================

Based loosely on a very popular design, this palette brings the price down to terrestrial levels. Firstly let me say that some assembly is required, unless you order one directly from my website. Otherwise:

The two hinges require a short length of raw unprinted filament, this acts as the hinge pin. You simply thread it carefully through the open end, wedding the two corresponding hinge halves together, then clip the end that's sticking out once you reach the capped end.

Second, you will need two 8x3 mm Neodymium disc magnets for the closure mechanism. There are two cavities for those, one is deep and one is flush-fit. Use a punch to carefully seat a magnet into the deep hole, then glue the second magnet into the flush hole. Of course make sure it is facing the right magnetic orientation first. A light coating of super glue is all you should need to secure it.

P.s. This is a two plate print.

Printing Facts: Bambu P1P

• Plate One 2h18m 82g

• Plate Two 54m 36g

• Total 3h11m 118g