1 / 3
Cup Holder with Print-in-Place Chain Handle — zdjęcie 1
1 / 3

Cup Holder with Print-in-Place Chain Handle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A portable cup / can holder that hangs from a handbag-style chain handle — printed in place, no chain assembly.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
48
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

A portable cup / drink holder that hangs from a print-in-place chain handle — like a little handbag for your can. It prints as one single piece: the cup and the whole articulating chain come off the bed together, already linked. No assembly, nothing to clip.

⚠ Supports are required. This is a fully captive print-in-place model — the chain links and the cup arc over open air. Slice it with supports (tree supports recommended) for a clean underside and to keep the links separating. After printing, remove the supports and gently work each link free, then lift the chain into a handle arc.

What you get

  • An open skeleton-cage cup (top rim band, vertical curved strips, spoked base) that grips cans and cups up to ~75 mm, with two "horns" on the rim that anchor the chain.

  • A chunky alternating-tilt chain that articulates link-to-link and doubles back into a comfortable carry handle.

Dimensions

  • Cup inner Ø ~75 mm, ~130 mm tall — holds a standard 330–500 ml can or a takeaway cup.

  • Chunky chain links (~29 mm), ~200 mm of chain → a handle loop.

Print

  • Supports: required (tree supports recommended).

  • 0.2 mm layers, 3 walls, 15–20 % infill.

  • PLA is fine; PETG if it'll ride in a hot car.

Hang it on a door handle, chair arm, stroller bar, tent pole, or a hook by the pool — anywhere you want a drink off the floor.

Tagi