Cup Holder with Print-in-Place Chain Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A portable cup / can holder that hangs from a handbag-style chain handle — printed in place, no chain assembly.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
A portable cup / drink holder that hangs from a print-in-place chain handle — like a little handbag for your can. It prints as one single piece: the cup and the whole articulating chain come off the bed together, already linked. No assembly, nothing to clip.
⚠ Supports are required. This is a fully captive print-in-place model — the chain links and the cup arc over open air. Slice it with supports (tree supports recommended) for a clean underside and to keep the links separating. After printing, remove the supports and gently work each link free, then lift the chain into a handle arc.
What you get
An open skeleton-cage cup (top rim band, vertical curved strips, spoked base) that grips cans and cups up to ~75 mm, with two "horns" on the rim that anchor the chain.
A chunky alternating-tilt chain that articulates link-to-link and doubles back into a comfortable carry handle.
Dimensions
Cup inner Ø ~75 mm, ~130 mm tall — holds a standard 330–500 ml can or a takeaway cup.
Chunky chain links (~29 mm), ~200 mm of chain → a handle loop.
Supports: required (tree supports recommended).
0.2 mm layers, 3 walls, 15–20 % infill.
PLA is fine; PETG if it'll ride in a hot car.
Hang it on a door handle, chair arm, stroller bar, tent pole, or a hook by the pool — anywhere you want a drink off the floor.
